Canon CanoScan 5000F CanoScan 5000/5000F Quick Start Guide - Page 14

Scanning Film (for CanoScan 5000F) 3 Place the loaded film guide on the scanner platen. Up to three frames in a film strip can be scanned at once. Position the film guide so that the three frames being scanned are toward the back of the platen and, as in the diagram, align the film guide with the FILM symbol on the platen. To scan the remaining frames, pivot the film guide 180°. Up to two slides can be scanned at once. Position the slides toward the back of the platen and, as in the diagram, align the film guide with the SLIDE symbol on the platen's left-hand side. Calibration Slot Film Strip Slides Position Detection Hole Platen To Scan Frames 1-3 To Scan Frames 4-6 Pivot the Guide 180 • Do not block the calibration slot or the small position detection hole on the film guide when you are scanning film. Obstructing either of these openings will prevent the film from being scanned properly. 4 Close the document cover. • You can purchase the Accessory Kit for CanoScan 5000F (AK-5000F) if the protective sheet or film guides are lost or damaged. Scanning Film The following steps explain how to scan the film with ArcSoft PhotoStudio. Windows Macintosh 1 Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5]. 2 Click the Acquire icon or click the [File] menu and select [Acquire]. 1 Double-click the [Applications (Mac OS 9)] and [PhotoStudio] folders and the [PhotoStudio] icon. 2 Click the Acquire icon or click the [File] menu and select [Import...]. ScanGear CS will start. If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button. 12 ScanGear CS will start. When the [Select Source] dialog displays, select [ScanGear CS 8.0] and click the [OK] button.