Canon CanoScan 5000F CanoScan 5000/5000F Quick Start Guide - Page 18

Specifications CanoScan 5000F CanoScan 5000 Scanner Type Flatbed Scanning Element CCD 6-line color Light Source Cold cathode fluorescent lamp Optical Resolution 2400 x 4800 dpi Selectable Resolution 25 - 9600 dpi (ScanGear CS) Scanning Bit Depth Color Grayscale 16 bit input / 16 bit or 8 bit output for each color (RGB) 16 bit input / 16 bit*1 or 8 bit output Scanning Speed*2 (Photo or Document) Scanning Speed*2 (Film) Preview Speed*3 Color Grayscale, B&W Color, GrayScale, B&W 7.2 msec./line (1200 dpi), 11.6 msec./line (2400 dpi) 7.2 msec./line (1200 dpi), 11.6 msec./line (2400 dpi) 7.2 - 115.2 msec./line - Approximately 7 sec. Interface USB 2.0 Hi-Speed, USB (USB 1.1 equivalent) Maximum Document Size A4/Letter: 216 x 297 mm (8.5 x 11.7 in.) Film Type/Number of Frames 35 mm strip (negatives/ positives)/3 frames - 35 mm slide (negatives/ positives)/2 frames - Scanner Buttons 4 buttons: COPY, SCAN, FILE, E-MAIL Temperature 10°C to 35°C (50°F to 95°F) Operating Range Humidity Power Requirements 10% to 90% RH, 20% to 80% RH when scanning film (without condensation 10% to 90% RH formation) AC adapter (100/120/230/240V)*4 Power Consumption In operation: 14.8 watts maximum, Stand-by: 5.6 watts (Using supplied AC adapter) Maximum Exterior Dimensions 278 x 508 x 108 mm (10.9 x 20 x 4.2 in.) 278 x 508 x 97 mm (10.9 x 20 x 3.8 in.) Weight Approximately 3.4 kg (7.5 lbs.) Approximately 3.2 kg (7.0 lbs.) *1 Available only when scanning films. *2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included. *3 Calibration processing time is not included. *4 Type of AC adapter depends on the area where the scanner is purchased. • Specifications are subject to change without notice. • Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall ScanGear CS and CanoScan Toolbox using the "Uninstall the Software" menu of the CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows XP with these programs still installed. After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according to the steps on page 4. For details, please read the "Troubleshooting" section of the Scanning Guide (HTML format manual).