Canon CanoScan 9950F CanoScan 9950F Quick Start Guide - Page 17
Specifications - flatbed scanner
View all Canon CanoScan 9950F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English Specifications Specifications Scanner Type Scanning Element CanoScan 9950F Flatbed CCD 6-line color Light Source Cold cathode fluorescent lamp Optical Resolution Selectable Resolution 4800 x 9600 dpi 25 - 19200 dpi (ScanGear CS) Scanning Bit Depth Scanning Speed*2 (Photo or Document) Scanning Speed*2 (Film) Preview Speed*3 Interface Color Grayscale Color Grayscale,B&W Color, GrayScale, B&W 16 bit input / 16 bit or 8 bit output for each color (RGB) 16 bit input / 16 bit*1 or 8 bit output 11.0 msec./line (2400 dpi), 11.0 msec./line (4800 dpi) 11.0 msec./line (2400 dpi), 11.0 msec./line (4800 dpi) 5.5 - 88.0 msec./line Approximately 3.6 seconds USB 2.0 Hi-Speed*4 / USB (USB 1.1 equivalent) IEEE1394a (FireWire400:Macintosh only) Maximum Document Size Film Type (negatives/positives) A4/Letter: 216 x 297 mm 35 mm strip 30 frames 35 mm slide 12 frames 120 format (max. 6 x 22 cm) 2 strips 120 format (max. 6 x 9 cm) 1 frame Scanner Buttons Operating Range Power Requirements Temperature Humidity 4"x 5" format 4 buttons: COPY, SCAN, PDF, E-MAIL 10°C to 35°C (50°F to 95°F) 10% to 90% RH, 20% to 80% RH when scanning film (without condensation formation) AC adapter (100/120/230/240 V)*5 Power Consumption In operation: 28 watts maximum Stand-by: 6 watts Power Switch Off: 0.1 watts (100V), 0.3 watts (200V) (Using supplied AC adapter) Maximum Exterior Dimensions 290 x 509 x 128 mm Weight Approximately 5.8 kg *1 16 bit output supported for film scanning only. *2 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included. *3 Calibration processing time is not included. *4 Note that Macintosh computers with USB 2.0 Hi-Speed interface expansion cards are not supported. *5 AC adapter type varies according to the region in which the scanner is purchased. • Specifications are subject to change without notice. Upgrading to USB 2.0 (Windows Only) To upgrade a computer to the USB 2.0 standard, please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility. Expansion Cards • Adaptec USB2connect 5100: PCI bus Hubs Adaptec XHUB4 • Adaptec USB2connect 3100LP: PCI bus Adaptec XHUB4PLUS • Adaptec USB2connect 2000LP: PCI bus Adaptec XHUB7PLUS • Adaptec DuoConnect: PCI bus For installation procedures, please read the instructions that accompany the USB expansion card/hub. 17