Canon CanoScan 9950F CanoScan 9950F Quick Start Guide - Page 7

English Connect the Scanner Connect the Scanner 1 Connect the FAU cable to the scanner. 2 Connect the scanner to the computer with the supplied USB interface cable. Supplied USB Interface Cable FAU Cable IEEE1394 (FireWire) Interface Cable (Macintosh only) FAU Cable FAU Connector IEEE1394 Interface Cable IEEE1394 Connector Wide Flat Connector USB Interface Cable Small Square Connector • On a Macintosh, you cannot have the USB cable and the IEEE1394 interface cable connected to the scanner at the same time. • To use the scanner with an IEEE 1394 (Fire Wire) port on a Macintosh computer, please purchase the IEEE 1394a (Fire Wire 400) cable recommended by Canon. • Please read the IEEE1394 caution sheet bundled with the scanner for precautions with the IEEE1394 interface and cables recommended by Canon. 3 Attach the supplied AC adapter to the scanner. AC Adapter 4 Press the power switch on the scanner's front panel to turn the power on. The Scan Lamp will light. Power Switch • Only use the USB interface cable and the AC adapter provided with the scanner. Use of other cables or adapters may lead to a malfunction. • When the scanner is connected to the USB 1.1 port on Windows XP, do not worry if the "HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can operate the scanner in this condition without problems. 7