Canon CanoScan N650U User Guide - Page 57
Plug-in Module CS-U, The [Image] menu [ColorSync] option cannot be used - mac os x
View all Canon CanoScan N650U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Problem: Scan button cannot be selected ®Solution 1: A scan cannot be performed if the scan area is set too small (less than 64 x 64 pixels). Increase the size of the scan area ®Solution 2: A scan cannot be performed unless a scan area is specified. Specify a scan area ®Solution 3: A scan cannot be performed if the required memory is larger than the free memory. Change the resolution (§ p. 19) or scan area (§ p. 30) until the required memory is lower Problem: The "Insufficient Memory" error message appears when scanning ®Solution 1: Select the smallest possible area and rescan ®Solution 2: Lower the resolution and magnification settings for the output device to the lowest possible values (§ p. 19) ®Solution 3: Rescan after closing all the application programs other than the one used to start Plug-in Module CS-U ®Solution 4: Rescan after you have restarted the application program used to start Plug-in Module CS-U ®Solution 5: Quit the application program used to start Plug-in Module CS-U and increase the memory allocated to it. Restart the computer before rescanning. Please refer to the manual for the application program for the correct method for increasing its memory allocation ®Solution 6: Increase the amount of RAM as required Problem: The [Image] menu [ColorSync] option cannot be used in Plug-in Module CS-U ®Solution: ColorSync is not recognized after Mac OS upgraded to Version 9 after Plug-in Module CS-U was installed onto Mac OS 8.5 or 8.6. Reinstall Plug-in Module CS-U (§ p. 6) 57