Canon Color imageCLASS X LBP1127C Getting Started Guide - Page 20
Appendix
View all Canon Color imageCLASS X LBP1127C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Appendix Important Safety Instructions This chapter describes important safety instructions for the prevention of injury to users of this machine and others, and damage to property. Read this chapter before using the machine, and follow the instructions to use the machine properly. Do not perform any operations not described in this manual. Canon will not be responsible for any damages resulting from operations not described in this manual, improper use, or repair or changes not performed by Canon or a third party authorized by Canon. Improper operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may not be covered under your Limited Warranty. IMPORTANT Do not install in the following locations Doing so may result in damage to the machine. • A location subject to temperature and humidity extremes, whether low or high • A location subject to dramatic changes in temperature or humidity • A location near equipment that generates magnetic or electromagnetic waves • A laboratory or location where chemical reactions occur • A location exposed to corrosive or toxic gases • A location that may warp from the weight of the machine or where the machine is liable to sink (a carpet, etc.) Avoid poorly ventilated locations This machine generates a slight amount of ozone and other emissions during normal use. These emissions are not harmful to health. However, Moving the Machine If you intend to move the machine, even to a location on the same floor of your building, contact your local authorized Canon dealer beforehand. Do not attempt to move the machine yourself. Power Supply WARNING • Use only a power supply that meets the specified voltage requirements. Failure to do so may result in a fire or electrical shock. • The machine must be connected to a socket-outlet with grounding connection by the provided power cord. • Do not use power cords other than the one provided, as this may result in a fire or electrical shock. WARNING Indicates a warning concerning operations they may be noticeable during extended use or • The provided power cord is intended for use long production runs in poorly ventilated rooms. with this machine. Do not connect the power that may lead to death or injury to persons if To maintain a comfortable working environment, cord to other devices. not performed correctly. To use the machine it is recommended that the room where the • Do not modify, pull, forcibly bend, or perform safely, always pay attention to these warnings. machine operates be appropriately ventilated. any other act that may damage the power Also avoid locations where people would be cord. Do not place heavy objects on the power CAUTION exposed to emissions from the machine. cord. Damaging the power cord may result in Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. Do not install in a location where condensation occurs Water droplets (condensation) may form inside the machine when the room where the machine a fire or electrical shock. • Do not plug in or unplug the power plug with wet hands, as this may result in an electrical shock. IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property. is installed is heated rapidly, and when the machine is moved from a cool or dry location to a hot or humid location. Using the machine under these conditions may result in paper jams, poor print quality, or damage to the machine. Let the machine adjust to the ambient temperature • Do not use extension cords or multi-plug power strips with the machine. Doing so may result in a fire or electrical shock. • Do not wrap the power cord or tie it in a knot, as this may result in a fire or electrical shock. • Insert the power plug completely into the AC and humidity for at least 2 hours before use. power outlet. Failure to do so may result in a Installation En To use this machine safely and comfortably, Avoid installing the machine near computers or other precision electronic equipment. Electrical interference and vibrations generated by the machine while printing can adversely affect fire or electrical shock. • Remove the power plug completely from the AC power outlet during a thunder storm. Failure to do so may result in a fire, electrical shock, or damage to the machine. carefully read the following precautions and the operation of such equipment. • Make sure that the power supply for the install the machine in an appropriate location. Avoid installing the machine near televisions, machine is safe, and has a steady voltage. WARNING Do not install in a location that may result in a fire or electrical shock • A location where the ventilation slots are blocked (too close to walls, beds, sofas, rugs, or similar objects) • A damp or dusty location radios, or similar electronic equipment. The machine might interfere with sound and picture signal reception. Insert the power plug into a dedicated power outlet, and maintain as much space as possible between the machine and other electronic equipment. • Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock. Avoid the following situations: If excessive stress is applied to the connection part of the power cord, it may damage the • A location exposed to direct sunlight or outdoors In altitudes of above sea level 3,000 m or higher power cord or the wires inside the machine may • A location subject to high temperatures Machines with a hard disk may not operate disconnect. This could result in a fire. • A location exposed to open flames properly when used at high altitudes of about • Connecting and disconnecting the power • Near alcohol, paint thinners or other 3,000 meters above sea level, or higher. cord frequently. flammable substances Other warnings • Do not connect unapproved cables to this machine. Doing so may result in a fire or electrical shock. • Do not place necklaces and other metal When using wireless LAN • Install the machine at a distance of 50 meters or less from the wireless LAN router. • As far as possible, install in a location where communication is not blocked by intervening objects. The signal may be degraded when • Tripping over the power cord. • The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part. • Applying excessive force on the power plug. CAUTION objects or containers filled with liquid on the passing through walls or floors. Install this machine near the power outlet and machine. If foreign substances come in contact • Keep the machine as far as possible from leave sufficient space around the power plug so with electrical parts inside the machine, it may digital cordless phones, microwave ovens, or that it can be unplugged easily in an emergency. result in a fire or electrical shock. other equipment that emits radio waves. • If any foreign substance falls into this machine, • Do not use near medical equipment. Radio unplug the power plug from the AC power outlet waves emitted from this machine may and contact your local authorized Canon dealer. interfere with medical equipment, which may CAUTION Do not install in the following locations The machine may drop or fall, resulting in injury. • An unstable location • A location exposed to vibrations result in malfunctions and accidents. If the operating noise concerns you Depending on the use environment and operating mode, if the operating noise is of concern, it is recommended that the machine be installed in a place other than the office. 20