Canon DR 7090C User Manual - Page 39

and hold the feeder lightly while scanning.

Page 39 highlights

Hint Leave the feeder raised when scanning thick documents like books, or operate the feeder as shown in the procedure below. 1. Open the feeder. 2. While pressing on the bottom of the feeder a, pull the feeder down and forward b. Chapter 3 Basic Operation 3. Set the thick document or book on the flatbed (platen glass) and hold the feeder lightly while scanning. 2" (50 mm) Book or Thick document 4. To return the feeder to its original position, open it all the way a, then close it carefully and slowly b. 3-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129

3-7
Chapter 3
Basic Operation
Hint
Leave the feeder raised when scanning thick documents like
books, or operate the feeder as shown in the procedure below.
1. Open the feeder.
2.
While pressing on the bottom of the feeder
a
, pull the feeder
down and forward
b
.
3. Set the thick document or book on the flatbed (platen glass)
and hold the feeder lightly while scanning.
4. To return the feeder to its original position, open it all the way
a
, then close it carefully and slowly
b
.
Book or Thick document
2" (50 mm)