Canon DR 7090C User Manual - Page 49
See ISIS/TWAIN Driver, Settings Dialog Boxes on p. 8-4., CapturePerfect 3.0, Operation Guide
UPC - 013803100242
View all Canon DR 7090C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
The Properties dialog box for the scanner driver opens. Chapter 3 Basic Operation 10. Place your document and click [Save] to start scanning. IMPORTANT You must load your documents as described below, depending on the specified [Scanning Side] and [Feeding Option] settings. • If the [Standard Feeding] Feed Option is enabled, load your documents before scanning. When all of the documents have been scanned, the Continue Scanning dialog box appears. 8. Set the scan settings. (See "ISIS/TWAIN Driver Settings Dialog Boxes" on p. 8-4.) Hint • To scan using the flatbed, set the scanning side to [Flatbed] or [Auto]. • If the scanning side is set to [Auto], documents placed in the feeder tray will be scanned. If there are no documents in the feeder tray, the flatbed will be scanned. 9. Specify the file name and the file type for saving the image data. For details on the available settings in the [Scan Batch to File Setting] dialog box, refer to the CapturePerfect 3.0 Operation Guide. • If a Feed Option other than [Standard Feeding] or [Manual Feeding] is selected, once you have started scanning, each document placed in the Document Feed Tray is scanned, and when no document is loaded, the scanner enters the standby state. • If the [Automatic Feeding] Feed Option is enabled, scanning is performed automatically whenever a sensor in the Document Feed Tray detects a loaded document, and pressing the Stop key causes the Continue Scanning dialog box to appear. • If the [Panel-Feeding] Feed Option is enabled, the Start key lamp is lit. You must load a document and press the Start key to scan. Pressing the Stop button causes the Continue Scanning dialog box to appear. • If the scanning side is set to [Auto] and the feeding option is set to [Automatic Feeding], scanning is performed as follows. - Documents are automatically detected and scanned when placed in the feeder. - The Start key lamp lights, and the flatbed enters a standby state. If you place a document on the flatbed and press the Start key, the document on the flatbed will be scanned. 3-17