Canon EOS-1D Software Instructions EOS DIGITAL SOLUTION DISK Ver.3 for Macinto - Page 16
Connecting the Camera to Your Computer
UPC - 013803005912
View all Canon EOS-1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connecting the Camera to Your Computer Connect the EOS-1D to your computer with the interface cable so that they can communicate. You can connect the camera while your computer is running. G When you connect the camera to your computer, be sure to follow the procedure below. G Never perform the following operations while the software installed from the SOLUTION DISK runs after connecting the camera to the computer as a communications error may occur. • Setting the camera's main switch to • Opening the CF card slot cover • Disconnecting the interface cable, the power cord, or the AC adapter's plug • Removing the DC coupler or the battery Before you perform the operations above, be sure to end the software being used. 1 Plug the interface cable into the computer. G Plug the cable into the FireWire port on the computer. FireWire port G You can plug either end of the cable into the FireWire port. G The location of the port differs depending on your computer. Refer to the User's Manual for your computer for details. Interface cable 2 Plug the interface cable into your camera. G Open the cover and plug the cable into the camera's DIGITAL terminal. G You can plug either end of the cable into the DIGITAL terminal. Interface cable DIGITAL terminal 3 Set the camera's main switch to . \ The camera can now communicate with your computer. G Start up the software to be used. 2-2