Canon EOS 5D Mark III EOS 5D Mark III Instruction Manual - Page 200

A Shooting with the LCD Monitor About the Information Display Each time you press the button, the information display will change. AF mode • d : Live mode • c : Face detection Live mode • f: Quick mode Auto Lighting Optimizer Eye-Fi card transmission status AF point (Live mode) GPS connection indicator Shooting mode Drive mode White balance Picture Style Card for recording/ playback Flash exposure compensation AE lock Flash-ready Image-recording quality Shutter speed HDR shooting/ Multiple exposures Aperture Histogram Digital compass FEB Magnification/ Magnifying position Exposure simulation Battery check Highlight tone priority AEB ISO speed Possible shots Exposure level The histogram can be displayed when [Expo. simulation: Enable] is set (p.205). You can display the electronic level by pressing the button (p.60). Note that if the AF mode is set to [u Live mode] or the camera is connected to a TV set with an HDMI cable, the electronic level cannot be displayed. When is displayed in white, it indicates that the Live View image brightness is close to what the captured image will look like. If is blinking, it indicates that the Live View image is not being displayed at the suitable brightness due to low- or bright-light conditions. However, the actual image recorded will reflect the exposure setting. If flash is used or bulb is set, the icon and histogram will be grayed out (for your reference). The histogram may not be properly displayed in low- or bright-light conditions. 200