Canon EOS 5D EOS DIGITAL Software Instruction Manual Windows - Page 6

1 Downloading Images from the Camera, and Camera Settings This chapter explains how to set up communication mode, how to connect the camera or a card reader (third-party product) to your computer, how to download images, and explains camera settings, etc. For EOS 5D and EOS1D series camera settings, refer to Chapter 4. For more information on the restrictions of the CameraWindow, refer also to the source listed below. Readme: Click the [Start] button X select [All Programs] ([Programs] in versions other than Windows XP) X [Canon Utilities] X [CameraWindow] X [CameraWindow MC 5 Readme], and the [Readme] file in the folder with your camera name. O Click on the item to display its page. Connecting the Camera to Your Computer 1-2 Downloading Images from Your Camera 1-4 Downloading All the Images in a Single Operation 1-4 Downloading Selected Images 1-4 Camera Settings 1-5 Downloading Images Using Your Card Reader 1-5 Downloading JPEG Images Using the PTP Function 1-6 Setting the Communication Mode You can set the camera's communication mode to [PC connect.], [PC connection] or [Normal]. O The settings on this page are only necessary for the EOS 5D, EOS DIGITAL REBEL XT/350D DIGITAL, EOS 20D, EOS DIGITAL REBEL/300D DIGITAL and EOS 10D. O With the EOS 10D, you must change the firmware to version 2.0.0 or later. For details on changing, refer to the Canon web site. 1 Check that the camera is not connected to the computer and then set the camera's power switch to . 2 Set the camera's communication mode to [PC connect.], [PC connection] or [Normal]. Operation window in the EOS 5D O With the EOS 5D, set [ Communication] in menu to [PC connect.]. O With the EOS DIGITAL REBEL XT/350D DIGITAL, set [Communication] in menu option [ ] to [PC connection]. O With the EOS 20D and EOS 10D, set [Communication] in menu to [Normal]. O With the EOS DIGITAL REBEL/300D DIGITAL, set [Communication] in menu option [ ] to [Normal]. 3 Press the < > button to switch the LCD monitor display off and then set the camera's power switch to . O When setting the communication mode, always ensure that the camera is not connected to the computer beforehand. Setting the communication mode while the camera is connected to the computer will cause camera and software malfunctions. O When using the EOS 5D or EOS DIGITAL REBEL XT/350D DIGITAL, EOS Capture cannot be used if the camera's communication mode is set to [Print/PTP]. O When using the EOS 20D, EOS DIGITAL REBEL/300D DIGITAL or EOS 10D, the camera and the software in the Solution Disk cannot communicate if the camera's communication mode is set to [PTP]. About the PTP Setting You can download JPEG images that use the PTP (Picture Transfer Protocol) function in Windows XP, when the camera's communication mode is set to [Print/PTP] or [PTP] (p.1-6). Cover/Table of Contents Introduction 1 Downloading Images from the Camera, and Camera Settings 2 Working with Images in the ZoomBrowser EX 3 Remote Shooting in the EOS Capture 4 Setting the EOS 5D and EOS-1D Series Cameras 5 Troubleshooting and Uninstalling the Software Index 1-1