Canon EOS 5DS Instruction Manual - Page 52
Max. Burst During Continuous Shooting
View all Canon EOS 5DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
3 Setting the Image-recording Quality Max. Burst During Continuous Shooting The maximum burst during continuous shooting depends on the imagerecording quality. The approx. maximum burst during continuous shooting is indicated below for each image-recording quality. Note that with high-speed CF cards, the maximum burst may be higher than shown in the table below depending on the shooting conditions. Imagerecording Quality 73 83 74 84 76 86 1 1+JPEG Max. Burst 60 150 120 319* 200 446* 17 12 * Continuous shooting is possible until the CF card becomes full. The number of shots remaining during the Max. Burst maximum burst is displayed on the lower right of the viewfinder. If "9" is displayed, it indicates that the maximum burst is nine or more shots. If "6" is displayed, it is six shots. While you are shooting and the number of shots remaining in the maximum burst is fewer than 9, the viewfinder will display "8", "7", etc. If you stop the continuous shooting, the maximum burst will increase. After all the captured images are processed and written to the CF card, the above table's figures for the maximum burst will apply. With white balance bracketing (p.65), the maximum burst will be lower. The maximum burst is displayed even when the drive mode is set to (Single) or . The maximum burst is displayed even when a CF card is not in the camera. Therefore, before shooting, make sure that a CF card is installed in the camera. 52