Canon EOS 6D Mark II Basic Instruction Manual - Page 39
Installing and Removing the Card
View all Canon EOS 6D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installing and Removing the Card You can use an SD, SDHC, or SDXC memory card (sold separately) with the camera. The captured images are recorded onto the card. Make sure the card's write-protect switch is set upward to enable writing and erasing. Installing the Card 1 Open the cover. Slide the cover as shown by the arrows to open it. Write-protect switch 2 Insert the card. As shown by the illustration, face the card's label side toward you and insert it until it clicks in place. 3 Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut. When you set the power switch to , the number of possible shots will be displayed on the LCD panel. Possible shots 37
37
You can use an SD, SDHC, or SDXC memory card (sold separately)
with the camera. The captured images are recorded onto the card.
1
Open the cover.
Slide the cover as shown by the
arrows to open it.
2
Insert the card.
As shown by the illustration, face
the card’s label side toward you
and insert it until it clicks in place.
3
Close the cover.
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
When you set the power switch to
<
1
>, the number of possible shots
will be displayed on the LCD panel.
Installing and Removing the Card
Installing the Card
Make sure the card’s write-protect switch is set upward to enable
writing and erasing.
Write-protect switch
Possible shots