Canon EOS 6D Mark II Basic Instruction Manual - Page 40
Open the cover., Remove the card., Removing the Card
View all Canon EOS 6D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing and Removing the Card Removing the Card Access lamp 1 Open the cover. Set the power switch to . Check that the access lamp is off, then open the cover. If [Recording...] is displayed on the LCD monitor, close the cover. 2 Remove the card. Gently push in the card, then let it go to eject. Pull the card straight out, then close the cover. When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around. • Unplugging and connecting a power cord (when household power outlet accessories (sold separately) are used). 38