Canon EOS Rebel T3 18-55mm IS II Lens Kit EOS REBEL T3 / EOS 1100D Instruction - Page 106
Locking the Flash Exposure, Press the <, > button., Focus the subject., Take the picture.
View all Canon EOS Rebel T3 18-55mm IS II Lens Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
A Locking the Flash ExposureN If the subject is on the side of the frame and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. This is when you should use FE lock. After setting the proper flash exposure for the subject, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EX-series Speedlite. * FE stands for Flash Exposure. 1 Press the button. X The built-in flash will rise. Press the shutter button halfway and look in the viewfinder to check that the icon is lit. 2 Focus the subject. 3 Press the button. (8) Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the button. X The flash will fire a preflash and the required flash output is calculated and retained in memory. X In the viewfinder, "FEL" is displayed for a moment and will light. Each time you press the button, a preflash is fired and the required flash output is calculated and retained in memory. 4 Take the picture. Compose the shot and press the shutter button completely. X The flash is fired when the picture is taken. If the subject is too far away and beyond the effective range of the flash, the icon will blink. Get closer to the subject and repeat steps 2 to 4. 106