Canon EOS Rebel T3 18-55mm IS II Lens Kit EOS REBEL T3 / EOS 1100D Instruction - Page 28
Installing and Removing the Battery and Card, Open the cover., Insert the battery.
View all Canon EOS Rebel T3 18-55mm IS II Lens Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing and Removing the Battery and Card Load a fully-charged Battery Pack LP-E10 into the camera. The card (sold separately) can be an SD, SDHC, or SDXC memory card. The captured images are recorded onto the card. Make sure the card's write-protect switch is set upward to enable writing/erasing. Installing the Battery/Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. Write-protect switch 2 Insert the battery. Insert the end with the battery contacts. Insert the battery until it locks in place. 3 Insert the card. As shown in the illustration, face the card's label side toward the camera back. Insert the card straight in all the way. 4 Close the cover. Press the cover until it snaps shut. When you set the power switch to , the number of possible shots (p.32) will be displayed on the LCD monitor. 28