Canon FAXPHONE L100 FAXPHONE L100 Basic Operation Guide - Page 86

(1) OFF (3) • • • (2) (3) (2) (2) • • (1) • Do not use this product near any medical electric equipments. Radiowave emitted from this product may influence those medical electric equipments. This may result in accidents caused by malfunction. CAUTION • Do not install the machine in unstable locations, such as on unsteady platforms or inclined floors, or in locations subject to excessive vibrations, as this may cause the machine to fall or tip over, resulting in personal injury. The ventilation slots are provided for proper ventilation of working parts inside the machine. Never place the machine on a soft surface, such as a bed, sofa, or rug. Blocking the slots can cause the machine to overheat, resulting in a fire. Do not install the machine in the following locations, as this may result in a fire or electrical shock. - A damp or dusty location - A location exposed to smoke and steam, such as near a cookery or humidifier - A location exposed to rain or snow - A location near a water faucet or water - A location exposed to direct sunlight - A location subject to high temperatures - A location near open flames When installing the machine, gently lower the machine to the installation site so as not to catch your hands between the machine and the floor or between the machine and other equipment, as this may result in personal injury. When connecting the interface cable, connect it properly by following the instructions in this manual. If not connected properly, this may result in malfunction or electrical shock. When moving the machine, follow the instructions in this manual to hold it correctly. Failure to do so may cause you to drop the machine, resulting in personal injury. • • • • of a damaged power cord can lead to an accident, such as a fire or electrical shock. Do not plug or unplug the power plug with wet hands, as this can result in electrical shock. Do not plug the power cord into a multiplug power strip, as this can result in a fire or electrical shock. Do not bundle up or tie up the power cord in a knot, as this can result in a fire or electrical shock. Insert the power plug completely into the AC power outlet. Failure to do so can result in a fire or electrical shock. If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire. Avoid the following situations: - Connecting and disconnecting the power cord frequently. - Tripping over the power cord. - The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part. - Applying a shock to the power connector.. Do not use power cords other than the one provided, as this can result in a fire or electrical shock. As a general rule, do not use extension cords. Using an extension cord may result in a fire or electrical shock. Remove the power plug from the AC power outlet and refrain from using the machine during a thunder storm. Lightning can result in a fire, electrical shock or malfunction. • CAUTION • Do not use a power supply voltage other than that listed herein, as this may result in a fire or electrical shock. • Always grasp the power plug when unplugging the power plug. Do not pull on the power cord, as this may expose the core wire of the power cord or damage the cord insulation, causing electricity to leak, resulting in a fire or electrical shock. • Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power plug, you may be unable to unplug it in an emergency. • Handling WARNING • Do not disassemble or modify the machine. There are high• • temperature and high-voltage components inside the machine which may result in a fire or electrical shock. Electrical equipment can be hazardous if not used properly. Do not allow children to touch the power cord, cables, internal gears, or electrical parts. If the machine makes an unusual noise or emits smoke, heat, or an unusual smell, immediately turn off the power switches of the machine and computer and disconnect the interface cable if it is connected. Then, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. Continued use can result in a fire or electrical shock. Do not use flammable sprays near the machine. If flammable substances come into contact with electrical parts inside the machine, this may result in a fire or electrical shock. Always turn off the power switches of the machine and computer, and then unplug the power plug and interface cables before moving the machine. Failure to do so can damage the cables or cords, resulting in a fire or electrical shock. Confirm that the power plug or power connector is inserted completely after moving the machine. Failure to do so can result • • Power Supply WARNING • Do not damage or modify the power cord. Also, do not lace heavy objects on the power cord or pull on or excessively bend it. This can cause electrical damage, resulting in fire or electrical shock. • Keep the power cord away from all heat sources. Failure to do so can cause the power cord insulation to melt, resulting in a fire or electrical shock. • The power cord should not be taut, as this may lead to a loose connection and cause overheating, which could result in a fire. • The power cord may become damaged if it is stepped on, fixed with staples, or if heavy objects are placed on it. Continued use • • • 86