Canon FAXPHONE L100 FAXPHONE L100 Basic Operation Guide - Page 87

in an overheating and fire. IEC60825-1:2007. • Do not drop paper clips, staples, or other metal objects inside the machine. Also, do not spill water, liquids, or other flammable substances (alcohol, benzene, paint thinner, etc.) inside the machine. If these items come into contact with a high-voltage area inside the machine, this may result in a fire or electrical shock. If these items are dropped or spilled inside the machine, immediately turn off the power switches of the machine and computer and disconnect the interface cable if it is connected. Then, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. • When plugging or unplugging a USB cable when the power plug is plugged into an AC power outlet, do not touch the metal part of the connector, as this can result in electrical shock. Maintenance and Inspections WARNING • When cleaning the machine, turn off the machine and • computer, and unplug the interface cables and power plug. Failure to do so can result in a fire or electrical shock. Unplug the power plug from the AC power outlet periodically and clean the area around the base of the power plug's metal pins and the AC power outlet with a dry cloth to remove all dust and grime. In damp, dusty, or smoky locations, dust can build up around the power plug and become damp, which can cause a short circuit, resulting in a fire. Clean the machine with a well wrung out cloth dampened with water or mild detergent diluted with water. Do not use alcohol, benzene, paint thinner, or other flammable substances. If flammable substances come into contact with electrical parts inside the machine, this may result in a fire or electrical shock. Some areas inside the machine are subject to high voltage. When removing jammed paper or when inspecting inside of the machine, be careful not to allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this can result in burns or electrical shock. Do not dispose of used toner cartridges in open flames. This may cause the toner remaining inside the cartridges to ignite, resulting in burns or fire. If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation. Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge. Confirm that the power plug or power connector is inserted completely after cleaning the machine. Failure to do so can result in an overheating and fire. Check the power cord and plug regularly. The following conditions may result in fire, so please contact your local authorized Canon dealer or the Canon help line. - There are burn marks on the power plug. - The blade on the power plug is deformed or broken. - The power is turned OFF or ON when bending the power cord. - The coating of the power cord is damaged, cracked, or dented. - A part of the power cord becomes hot. Check regularly that the power cord and plug are not handled in the following manner. Failure to do so can result in a fire or electrical shock. - The power connector is loosened. - Stress is being applied to the power cord by a heavy object or by fixing it with staples. - The power plug is loosened. - The power cord is tied in a bundle. - A part of the power cord is put in an aisle. - The power cord is put in front of the heating appliance. CAUTION • Do not place heavy objects on the machine. The object or the machine may fall, resulting in personal injury. • • Turn off the power switch when the machine will not be used for a long period of time, such as overnight. Turn off the machine and unplug the power plug if the machine will not be used for an extended period of time, such as for several days. Open or close covers and install or remove cassette gently and carefully. Be careful not to hurt your fingers. Keep your hands and clothing away from the roller in the output area. Even if the machine is not printing, the roller may suddenly rotate and catch your hands or clothing, resulting in personal injury. The output slot is hot during and immediately after printing. Do not touch the area surrounding the output slot, as this may result in burns. Printed paper may be hot immediately after being output. Be careful when removing the paper and aligning the removed paper, especially after continuous printing. Failure to do so may result in burns. Close the upper unit gently so as not to catch your hand. This may result in personal injury. The laser beam can be harmful to the human body. The laser beam is confined in the laser scanner unit by a cover, so there is no danger of the laser beam escaping during normal machine operation. Read the following remarks and instructions for safety. - Never open covers other than those indicated in this manual. - Do not remove the caution label attached to the cover of the laser scanner unit. • • • • • • • • • • • • - If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes. CAUTION • The fixing unit and its surroundings inside the machine become hot during use. When removing jammed paper or when inspecting the inside of the machine, do not touch the fixing unit and its surroundings, as this may result in burns. • If you operate this machine in manners other than the control, adjustment, and operating procedures prescribed in this manual, this may result in hazardous radiation exposure. • This machine is confirmed as the class 1 laser product in 87