Canon FAXPHONE L170 FAXPHONE L180 Starter Guide - Page 7

Connect Power Cord, <CHECK PRINTER COVER> is displayed, <INSTALL CARTRIDGE> is displayed

Page 7 highlights

Connect Power Cord Connect Power Cord 1 2 12/31/2005 SAT 15:11 FaxOnly STANDARD Connect the power cord into the rear socket and the wall outlet to turn on the machine. The machine enters the standby mode. NOTE This machine does not have a power switch. What if... ● is displayed: Make sure that the cartridge cover is closed properly. (See "Install Cartridge," on p. 5.) ● is displayed: Make sure that the cartridge is installed properly. (See "Install Cartridge," on p. 5.) ● is displayed: Make sure that the paper loaded in the cassette or multi-purpose feeder matches the setting in the Menu. (See "Load Paper," on p. 7 and Chapter 4, "Paper Handling," in the Basic Guide.) 11 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

11
Connect Power Cord
Connect Power Cord
1
Connect the power cord into the rear socket and
the wall outlet to turn on the machine.
2
The machine enters the standby mode.
NOTE
This machine does not have a power switch.
What if...
<CHECK PRINTER COVER> is displayed:
Make sure that the cartridge cover is closed properly.
(See “Install Cartridge,” on p. 5.)
<INSTALL CARTRIDGE> is displayed:
Make sure that the cartridge is installed properly.
(See “Install Cartridge,” on p. 5.)
<INCORRECT PAPER SIZE> is displayed:
Make sure that the paper loaded in the cassette or multi-purpose feeder matches the <PAPER SIZE> setting in the
Menu. (See “Load Paper,” on p. 7 and Chapter 4, “Paper Handling,” in the Basic Guide.)
12/31/2005 SAT 15:11
FaxOnly
STANDARD
12