Canon FS100 FS10/FS11/FS100 Instruction Manual - Page 84
Indicators and Onscreen Displays, Picture and Sound - us cellular
UPC - 013803092530
View all Canon FS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Additional Information Indicators and Onscreen Displays lights up in red. - Battery pack is exhausted. Replace or charge the battery pack ( 19). appears on the screen. - The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be displayed. lights up in red. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card ( 30) if the display does not change back to normal. - The memory card is full. Replace the memory card or delete some recordings to free some space on the memory card. flashes in red on the screen. - The camcorder has malfunctioned. Consult a Canon Service Center. The CHG (charge) indicator flashes rapidly while the camcorder is charging. - (one flash at 0.5-second intervals) Charging has stopped because the compact power adapter or the battery pack is faulty. Consult a Canon Service Center. The CHG (charge) indicator flashes very slowly while the camcorder is charging. - (one flash at 2-second intervals) The battery pack is too hot. The charging will start once the battery pack temperature is below 40 °C (104 °F). - Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F). - The battery pack is damaged. Use a different battery pack. The CHG (charge) indicator does not turn on even though a battery pack is attached. - The camcorder cannot communicate with the battery pack attached. Such battery packs cannot be charged using this camcorder. Picture and Sound Screen displays turn on and off repeatedly. - The battery pack is exhausted. Replace or charge the battery pack ( 19). - Remove the battery pack and reattach it correctly. Abnormal characters appear on the screen and the camcorder does not operate properly. - Disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. Video noise appears on screen. - When using the camcorder close to devices that emit strong electromagnetic fields (plasma TVs, cellular phones, etc.), keep a distance between the camcorder and these devices. Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fireworks, shows or concerts), sound may become distorted or it may not be recorded at the actual levels. This is not a malfunction. 84