Canon HV20 HV20 Instruction Manual - Page 84
Troubleshooting - lens adapter
UPC - 013803083200
View all Canon HV20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
84 Trouble? Additional Information Trouble? Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery pack. 18 • The camcorder switches off by itself. • The cassette compartment Attach the battery pack correctly. cover will not open. • The LCD/viewfinder switches on and off. The charge indicator flashes Charging has stopped because the compact power adapter or - rapidly (about twice per the battery pack is faulty. second). • Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - • The charge indicator flashes 40 °C (32 °F and 104 °F). very slowly (about once every 2 seconds). Battery packs become hot with use and may not charge. When the battery pack is outside the charging temperature range, the - CHARGE (charge) indicator will flash irregularly. The charging will start once the battery pack temperature is below 40 °C (104 °F). The battery pack is damaged. Use a different battery pack. - Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. - Load a cassette. 20 Abnormal characters appear on Disconnect the power source and reconnect it after a short time. - the screen. The camcorder If the problem still persists, disconnect the power source and does not operate properly. press the RESET button with a pointed item. Pressing the RESET button resets all settings. " " flashes on the screen. Load a cassette. 20 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery pack. 18 " " flashes on the screen. Condensation is detected. See reference page. 94 The lens cover is not Turn the camcorder off and then on again. - completely open. " " flashes red on the screen. The camcorder malfunctions. Consult a Canon Service Center. - "REMOVE THE CASSETTE" Remove the cassette and reinsert it. 20 appears on the screen. The wireless controller will not Set [WL.REMOTE] to [ON]. 44 work. The battery of the wireless controller is exhausted. Replace the 21 battery.