Canon LE-5W BK User Manual - Page 59
Basic menu, Locking control buttons during, standby, Adjusting keystone distortion, automatically
View all Canon LE-5W BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Basic menu Locking control buttons during standby Home screen > Setup > Basic > Key Lock This function locks the control panel and remote control buttons during standby to prevent the projector from being turned on accidentally. Adjusting keystone distortion automatically Home screen > Setup > Basic > Auto Keystone This function automatically detects the projector's angle of tilt and adjusts keystone distortion to project the optimum image. Off Start the projector as normal. Off Auto Keystone is not On If you do not release the key performed. lock, you cannot turn on the On Auto Keystone is performed. projector. See the note below for more details. • Keystone can be adjusted within ± 40 degrees. (When projecting an input signal with 3D timing, the keystone can only be • To turn on the projector when Key Lock is adjusted within ± 4 degrees.) on, press and hold the INPUT button on the control panel or the AUTO PC button • on the remote control until the STATUS LED lights up briefly. You can then turn on the projector by pressing the POWER button on the control panel or the remote Because digital processing is performed when adjusting the image, the image after adjustment may differ from the original image. Also, the screen's aspect ratio may change. control. • If you perform manual keystone • If you press any buttons other than the INPUT button on the control panel or the AUTO PC button on the remote control while the keys are locked, the STATUS LED lights up (P88). adjustment from the OSD, the auto keystone function is disabled until the next time the projector is started. However, you can enable auto keystone again by setting Auto Keystone to Off, and then setting it back to On. 59 Menu function settings