Canon LE-5W BK User Manual - Page 82
Keystone, LED Mode, Adjusting keystone distortions, Adjusting the LED light intensity
View all Canon LE-5W BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Keystone Adjusting keystone distortions LED Mode Adjusting the LED light intensity MENU > Keystone MENU > LED Mode This function allows you to correct keystone This function allows you to adjust the distortions. brightness of the LED light source. Use this if you cannot correct the distortion using Auto Keystone. Press the / buttons to adjust the values. By changing the LED mode, you can reduce the amount of electricity consumed and the noise. When you have finished making adjustments, Normal Projects at standard press the MENU button or the BACK button. brightness. Eco Reduces the brightness of the LED, and therefore the • Keystone can be adjusted within ± 40 degrees.*1 • If you perform manual keystone amount of electricity consumed as well as the fan noise. adjustment, the auto keystone function is disabled until the next time the projector is Select the LED Mode with the OK button, started. However, you can enable auto keystone again by setting Auto Keystone to Off, and then setting it back to On. press the / buttons to select the content, and then press the OK button to confirm your selection. * 1 When projecting an input signal with 3D Press the MENU button or the BACK button. timing, the keystone can only be adjusted within ± 4 degrees. • The default is Normal. • The setting is saved even if you turn off the projector. Menu function settings 82