Canon LV-7210 lv7210_series_basic_cmd.pdf - Page 14
Power Management Shut down COMMAND - e projector
![]() |
View all Canon LV-7210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Basic Serial Functional Specification for LV-5210/7215/7210 6.31 IMAGE (Toggle) COMMAND COMMAND "C27" [CR] Detail Switch Image setting status. This command works the same as the remote control's "Image" button or the key on the projector body. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.32 ON START SETTING COMMAND COMMAND "C28" [CR] Detail Set to Power ON setting status This setting status is stored in EEPROM, even if the power is ON/OFF. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.33 ON STARTCANCELLATINO COMMAND COMMAND "C29" [CR] Detail Cancel Power ON Start This status is stored in EEPROM even when power is OFF or ON Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.34 Power Management Ready COMMAND COMMAND "C2A" [CR] Detail Set Power Management to Ready This status is stored in EEPROM, so even if turning off and on. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.35 Power Management OFF COMMAND COMMAND "C2B" [CR] Detail Set Power Management to OFF mode. This status is stored in EEPROM, and even if turning OFF and ON. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.36 Power Management Shut down COMMAND COMMAND "C2E" [CR] Detail Set Power Management to Shut down mode. This status is stored in EEPROM, and even if turning OFF and ON. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] Page 14
![](/manual_guide/products/canon-lv7210-lv7210seriesbasiccmdpdf-4df7e46/14.png)