Canon LV-7210 lv7210_series_basic_cmd.pdf - Page 9
Operation Requirements, 5 POWER ON COMMAND, 6 POWER OFF COMMAND QUICK Power OFF, 7 POWER OFF COMMAND - projector
View all Canon LV-7210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Basic Serial Functional Specification for LV-5210/7215/7210 6.4 Operation Requirements When the projector's status in this below, functional execution commands are limited. Projector Status Standby Mode Processing Countdown Processing Cooling Down Abnormal Temperature Status Processing Mode Change Processing Power Save・Cooling Down Processing Power Save Available Functional Execution Commands C00:POWER ON Only C00:POWER ON→Terminate processing Countdown C01:POWER OFF C02:POWER OFF→Terminate processing Countdown NONE(does not execute even if receiving a command) NONE(does not execute even if receiving a command) NONE(does not execute even if receiving a command) NONE(does not execute even if receiving a command) C00:POWER ON C01:POWER OFF Other Commands: POWER ON Note) When the status is above, even if the projector receives other command in the above status, the projector returns [ACK] [CR]. 6.5 POWER ON COMMAND COMMAND "C00" [CR] Detail Note) When the status is above, even if the projector receives other command in the above status, the projector returns [ACK] [CR]. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.6 POWER OFF COMMAND (QUICK Power OFF) COMMAND "C01" [CR] Detail Power OFF(Stand By) When Power OFF with ON-OFF button of the projector or the remote control, "Power OFF" will be displayed. However, as soon as this command is sent, Quick Power OFF is executed. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.7 POWER OFF COMMAND COMMAND "C02" [CR] Detail Power OFF(Stand By) When Power OFF with ON-OFF button of the projector or the remote control, "Power OFF" will be displayed. However, as soon as this command is sent, Power OFF is executed. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] Page 9