Canon LV-7210 lv7210_series_exp_cmd.pdf

Canon LV-7210 - XGA LCD Projector Manual

Get Canon LV-7210 - XGA LCD Projector PDF manuals and user guides View all Canon LV-7210 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon LV-7210 manual content summary:

  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 1
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 LV-5210/7215/7210 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATION Page 1
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 2
    SPECIFICATION for LV-5210/7215/7210 CONTENTS 1. Overtview 2. Serial Interface Specification 2.1 Communication Specification 2.2 Connection 3. Note for communications 4. Name Definition 5. Functional Execution Command table 5.1 Image Command Table 5.2 PC Control Command Table 5.3 VIDEO Control
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 3
    SPECIFICATION for LV-5210/7215/7210 8.4.7 WBAL COMMAND 8.4.8 COLTEMP COMMAND 8.4.9 PROGV COMMAND 8.4.10 IMGE COMMAND 8.4.11 CF IMAGE ADJ COMMAND 8.5 PC Control CF_PC STORE COMMAND 8.5.9 CF_PC MODE FREE COMMAND 8.6 VIDEO Control Command 8.6.1 CF_AVDDOTS COMMAND 8.6.2 CF_AVDLINECOMMAND 8.6.3 CF_AVHPOS
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 4
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.11 Setting Command 8.11.1 CF_BBACK COMMAND 8.11.2 CF_DISPCOMMAND 8.11.3 CF_LOGOCOMMAND 8.11.4 CF_CEILCOMMAND 8.11.5 CF_REARCOMMAND 8.11.6 CF_RCODE COMMAND 8.11.7 CF_LANGCOMMAND 8.11.8 CF_ON-STACOMMAND 8.11.9 CF_P-MANECOMMAND 8.
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 5
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.5.3 CR-CLAMP COMMAND 9.5.4 CR-H-POS COMMAND 9.5.5 CR-V-POS COMMAND 9.5.6 CR-DDOTS COMMAND 9.5.7 CR-DLINECOMMAND 9.5.8 CR-PC STORECOMMAND 9.5.9 CR-SET PC ADJ COMMAND 9.6 Video Command 9.6.1 CR_SERSYSCOMMAND 9.7 Input Command 9.7.1
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 6
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.12 Other Status Read Command 9.12.1 CR-SIGNAL COMMAND 9.12.2 CR-VMUTECOMMAND 9.12.3 CR-FREEZECOMMAND 9.12.4 CR-PTIMERCOMMAND 9.12.5 CR-TEMPWARNCOMMAND 9.12.6 CR-TEMPFAILCOMMAND Page 6
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 7
    for LV-5210/7215/7210 1 Outview 1.1 This Functional Specification defines communication functions such as Wireless Imager for LV-5210/7215/7210. 1.2 The Projector Firmware Ver.1.x-ready. 1.3 Commands are to communicate to such as Wireless Imager, but most commands control a remote projector with
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 8
    SPECIFICATION for LV-5210/7215/7210 3 Note for communications 3.1 The expand command is defined one Command/one line that starts "C" and ends carriage return (0x0D) 3.2 When a projector from a controller to a projector is represented as COMMAND, and data from a projector to a controller for the
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 9
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 5 Functional Execution Command Table 5.1 Image Command Table Execute PC Adj. Status to MODE 1, 2, 3, 4, or 5. Reset MODE1, 2, 3, 4, and 5. 5.3 VIDEO Control Command Table Execute Command CF_AVDDOTS_%1 [CR] CF_AVDLINE_%1 [CR]
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 10
    FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 5.5 Reset lamp total running time. Select lamp MODE. 5.7 Sound Command Table Execute Command CF_VOLUME_%1 [CR] CF_MUTE_%1 [CR] Item Set Volume value Control function. Set Ceiling function. Set Rear Function. Select Remote Control Reception Code.
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 11
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 6 Status Read Command Table 6.1 IMAGE Status Read for PC Adj.; MODE 1-5. Get current PC signal for PC display status. 6.3 VIDEO Status Read Command Table Status read command CR_SERSYS [CR] Item Get selected. current signal
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 12
    SPECIFICATION for LV-5210/7215/7210 6.6 Lamp Status Read Command Table Status read command CR_LAMPREPL [CR] CR_LAMPMODE [CR] CR_PROJH [CR] Item Get information for lamp replacement time. Get lamp MODE status Get projector setting value Get selected. remote Control code status Get selected.
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 13
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 7 Error Code Table Error/ode ? 000 101 102 103 201 301 303 Content -When receives data that cannot be decoded -Parameter determination error (digit number
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 14
    SPECIFICATION for LV-5210/7215/7210 8 Functional Execution Command 8.1 Format １. The following format's commands issued form a PC Pattern1:"CF_COMMAND" [CR] Pattern2:"CF_COMMAND_%1" [CR] CF_:Header COMMAND:Letters %1:Parameter(Letters) _:Space（To separate COMMAND and parameter） ２. When a projector
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 15
    SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4 IMAGE Command 8.4.1 CF_BRIGHT Command COMMAND "CF_BRIGHT_%1" [CR] "000-063"------ Directly select the Bright Setting Value %1 "UP Bright setting value +1 "DN Bright setting value -1 Details Set the User control Bright Value
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 16
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.4 CF_TINTCOMMAND COMMAND "CF_TINT_%1" [CR] "000-063"------ Directly select for Tint setting value %1 "UP Current Setting value +1 "DN Current Setting value-1 Details Set the user Control tint value. The value set by
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 17
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4.7 CF_WBAL-COMMAND COMMAND "CF_WBAL-%1_%2" [CR] "R RED %1 "G user Control value by white balance %1 determination. The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector,
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 18
    SPECIFICATION for LV-5210/7215/7210 （the value is set and store by a user） Details Response Select an Image MODE.（When it projector is set to ALL OFF and is turned on again, the setting value will be able to be back. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.5 PC Control
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 19
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.2 CF_TDOTS COMMAND COMMAND "CF_TDOTS_%1" [CR] "nnnn- OFF the projector, the value will return to the original setting. （stay in STANDBYMODE.） Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.5.4 CF_H
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 20
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.5 CF_V-POS COMMAND COMMAND "CF_V-POS_%1" [CR] " OFF the projector, the value will return to the original setting. (stays in STANDBYMODE) Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.5.6 CF_DDOTS
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 21
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.5.8 CF_PC STORECOMMAND COMMAND " VIDEO 8.6 VIDEO Control COMMAND 8.6.1 CF_AVDDOTS COMMAND COMMAND "CF_AVDDOTS_%1" [CR] %1 "UP"...........Current setting value +1 "DN Current setting value -1 Details Set AV Service
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 22
    SPECIFICATION for LV-5210/7215/7210 8.6.2 CF_AVDLINECOMMAND COMMAND "CF_AVDLINE_%1" [CR] %1 "UP Current Setting+1 "DN Current Setting-1 Details Set AV service signal, the projector returns "101" [CR]. Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.6.5 CF_AVSERV
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 23
    FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Response Acceptable "000" [CR] Unacceptable "101" [CR] ----Input-VIDEO 8.7 Input Control COMMAND 8.7.1 CF_INPUT COMMAND COMMAND "CF_INPUT_%1" [CR] "COMPUTER1"........ Select COMPUTER 1 input %1 "COMPUTER2"........ COMPUTER 2 input "VIDEO VIDEO
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 24
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.7.3 CF_INPUT_%1_%2 COMMAND COMMAND "CF_INPUT_%1_%2" [CR] "COMPUTER1".... Select COMPUTER 1 input %1 "COMPUTER2".... Select COMPUTER 2 input "VIDEO Select VIDEO input When %1 is COMPUTER1... "ANALOG Select ANALOG RGB
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 25
    SPECIFICATION for LV-5210/7215/7210 Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.8 Screen Control COMMAND projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (stay in STANDBYMODE.) (stays in STANDBYMODE.) Response Input-VIDEO
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 26
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.8.4 CF_DZCENTCOMMAND COMMAND "CF_DZCENT_%1" [CR] %1 "CENT"-----Cancel Set Keystone store MODE to Store "RST" ----- Set Keystone store MODE to Reset Details Set Keystone store MODE（Only valid when it is in the usual Power
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 27
    SPECIFICATION for LV-5210/7215/7210 8.9 Lamp COMMAND 8.9.1 CF_LAMPH COMMAND COMMAND "CF_LAMPPH_%1" [CR] %1 "RST" Details Reset total lamp volume value like remote Control unit" operation, Sound Mute ON will be canceled. The setting value will be stored in a projector. Response Acceptable
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 28
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Response Acceptable "000" [CR] Unacceptable "Error Ceiling "OFF"---- Cancel Ceiling Details Set/Cancel Ceiling (Only valid when it is in the usual Power ON status.) The value set is stored in EEPROM. When ALL OFF the projector
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 29
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.11.5 CF_REARCOMMAND COMMAND "CF_REAR_%1" [CR] %1 "ON 8 Details Select a remote Control code.(Only valid when it is in the usual Power ON status.) The value set is stored in EEPROM. When ALL OFF the projector, the value will
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 30
    FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Unacceptable The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Response Acceptable " speed "NOR"------Select NORMAL speed Details Change Fan Control speed. Only valid when it is in the
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 31
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Response value will return to the original setting. Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.12 CF_KEYDISCOMMAND COMMAND "CF_KEYDIS_%1" [CR] N/A" --- RC and KEY are
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 32
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.11.16 has done. When sending the command during the process, the projector returns the error code, "301". Response Acceptable "000" [CR] Unacceptable "Error Code"
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 33
    SPECIFICATION for LV-5210/7215/7210 9 Status Read Command 9.1 FORMAT １. PC issues Commands as below "CR_COMMAND" [CR] COMMAND: Character Line ２. When projector 9.4.2 CR_CONTCOMMAND COMMAND "CR_CONT" [CR] Details Get Contrast of user Control Response Acceptable %a "000_%a" [CR] "000"-- "063
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 34
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.4.4 CR_TINTCOMMAND COMMAND "CR_TINT"[CR] Details Get Tint value of user Control Acceptable "000_%a"[CR] Response %a "000"-- "063" Unacceptable "Error code"[CR] --- invalid "?"[CR When receives unclear command 9.4.5
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 35
    SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.4.9 CR_WBAL-BCOMMAND COMMAND "CR_WBAL-B" [CR] Details Get White Balance Blue of user Control Acceptable "000_ "CUSTOM1 Custom "Error code" [CR] ---- Invalid Unacceptable "?" [CR When the projector received unclear command Page 35
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 36
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.4.13 CR_IMGGMD COMMAND COMMAND "CR_IMGGMD" [CR] Details Unacceptable "Error code" [CR] ---- Invalid "?" [CR] -------- When the projector received unclear command 9.5.2 CR_TDOTS COMMAND COMMAND "CR_TDOTS" [CR] Details Get
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 37
    SPECIFICATION for LV-5210/7215/7210 9.5.4 CR_H-POS COMMAND COMMAND "CR_H-POS" [CR] Details Get Horizontal Position value Acceptable "000_%a" [CR] Response %a "0000"-"nnnn" （nnnn = Total Dots - Display Dots） Unacceptable "Error code" [CR] ---- Invalid "?" [CR] -------- When the projector
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 38
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.5.8 CR_PC STORECOMMAND COMMAND "CR_PCSTORE" [CR] Details signal. When AUTO MODE, it returns by AUTO-detect. Only available when Input-VIDEO. (Unavailable when Input is COMPUTER.) Acceptable "000_%a" [CR] Response "1080I60"--
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 39
    FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.7 Input COMMAND 9.7.1 CR_INPUTCOMMAND COMMAND "CR_INPUT" [CR] Details Get selected. INPUT No. Acceptable "000_%a" [CR] Response "COMPUTER1".... COMPUTER1 Input is selected. %a "COMPUTER2".... COMPUTER2 Input is selected.. "VIDEO VIDEO Input
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 40
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.7.4 CR_SYSTEMCOMMAND COMMAND "CR_SYSTEM" [CR] Details Get selected. system Acceptable Size Acceptable "000_%a" [CR] Input is PC Response %a Input VIDEO "NORMAL".... Select 4:3 screen "WIDE Select 16:9 screen "TRUE True
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 41
    SPECIFICATION for LV-5210/7215/7210 When the projector received unclear Reset Unacceptable "?" [CR COMMAND 9.9 Lamp COMMAND 9.9.1 CR_LAMPREPLCOMMAND COMMAND "CR_LAMPREPL" [CR] Details Get lamp replacement time information Acceptable "000_%1" [CR] Response %1 "1Y"-- over the lamp replacement
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 42
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.9.2 CR_LAMPMODECOMMAND COMMAND "CR_LAMPHMODE" [CR] Details Get lamp replacement time information Acceptable "000_%1" [CR] Response "NORMAL" Lamp MODE is NORMAL %1 "ECO"Lamp MODE is silent "AUTO" Lamp MODE is AUTO
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 43
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11 Setting Status COMMAND 9.11.1 CR_BBACKCOMMAND COMMAND "CR_BBACK "USER Logo Function User Unacceptable "?" [CR] 9.11.4 CR_RCODECOMMAND COMMAND "CR_RCCODE" [CR] Details Get the selected. code in Remote Control MODE
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 44
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11.5 CR_LANGCOMMAND COMMAND "CR_LANG" [CR] Details Get selected. language Acceptable "000_%a" [CR] Response "ENG"---- English is selected. "DEU"---- German is selected. "FRA"---- French is selected. "
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 45
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11.9 CR_FANSPEEDCOMMAND COMMAND "CR_FANSPEED" [CR] Details Get Fan Control Speed Acceptable "000_%a" [CR] Response %a "MAX"--- Fan Control Speed is Max. "NOR"--- Fan Control Speed is NORMAL Unacceptable "?" [CR] 9.11.10
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 46
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.11.13 CR_POINTERCOMMAND COMMAND "CR_POINTER" [CR] Details Get pointer setting status Acceptable "000_%a_%b" [CR] "SPOTLIGHT"....... Spotlight Mode %a "ARROW Arrow Mode "FINGER Finger Mode "LASER
  • Canon LV-7210 | lv7210_series_exp_cmd.pdf - Page 47
    EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 9.12.4 CR_PTIMERCOMMAND COMMAND "CR_PTIMER" [CR] Details Get Presentation Timer status the data will be " 00.0S". Every time the projector is reset, " 00.0S"is set. In short, previous data is deleted. Unacceptable "?" [CR
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION
for LV-5210/7215/7210
LV-5210/7215/7210
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATION
Page
1