Canon LV-7210 lv7210_series_exp_cmd.pdf - Page 15
IMAGE Command, CF_BRIGHT Command, CF_CONTCOMMAND, Set the User control Bright Value
View all Canon LV-7210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 8.4 IMAGE Command 8.4.1 CF_BRIGHT Command COMMAND "CF_BRIGHT_%1" [CR] "000-063"------ Directly select the Bright Setting Value %1 "UP Bright setting value +1 "DN Bright setting value -1 Details Set the User control Bright Value The value set by the command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power ON State. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.2 CF_CONTCOMMAND COMMAND "CF_CONT_%1" [CR] "000-063"------ Directly select for conntrast setting value %1 "UP Contrast setting value "DN Contrast setting value-1 Details Set the user Control contrast value. The value set by this command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power ON status.) Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.3 CF_COLORCOMMAND COMMAND "CF_COLOR_%1" [CR] "000-063"------ Directly Color setting value %1 "UP Color setting value+1 "DN Color setting value-1 Details Set the user Control Color value. The value set by this command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For STANDBYMODE, this value stays.) Only valid when it is in the usual Power On state. Response Acceptable "000" [CR] Unacceptable "Error Code" [CR] Page 15