Canon LV-7210 lv7210_series_exp_cmd.pdf - Page 7
Outview, Serial Interface Specification, Communication Specification, 2 Connection, Projector - lv projector
![]() |
View all Canon LV-7210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210 1 Outview 1.1 This Functional Specification defines communication functions such as Wireless Imager for LV-5210/7215/7210. 1.2 The Projector Firmware Ver.1.x-ready. 1.3 Commands are to communicate to such as Wireless Imager, but most commands control a remote projector with PC installed RS232C. That's why commands are defined as expand serial commands 2 Serial Interface Specification 2.1 Communication Specification Specification Synchro System Transmission Speed Data Length Asynchronou 9600 / 19200 8 bit Parity N/A Stop Bit 1 Flow Control N/A Note1) transfer rate: initial setting value is 19200 Note2) transfer rate can be changed by service MODE 2.2 Connection Must use a dedicated serial cable that come with the projector for a connection to a COMPUTER and a projector. PC Projector COM No.1 Control Port CD 1 1 RXD 2 2 TXD 3 3 DTR 4 4 SG 5 5 DSR 6 6 RTS 7 7 CTS 8 8 RING 9 (D-Sub 9 Pin) (Mini DIN 8 Pin) Page 7
![](/manual_guide/products/canon-lv7210-lv7210seriesexpcmdpdf-fbc41a2/7.png)