Canon LV-7210 lv7215_7210_5210_manual.pdf - Page 14
Remote Control Code, Wireless Mouse Operation
View all Canon LV-7210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Part Names and Functions Remote Control Code This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control unit interference when operating several projectors or video equipment at the same time. (Change the remote control code for the projector first before changing that for the remote control unit. See "Remote control" on page 40.) 1 While pressing the MENU button, press the IMAGE button the number of times corresponding to each remote control code number. Each time you press the IMAGE button, the code is changed sequentially. (See the list below.) 2 To initialize the remote control code for the remote control unit, slide the RESET/ON/ALL-OFF switch to the RESET, and then to the ON. The initial code is Code 1. While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code for the projector. Remote Control Code Number of Times of Pressing IMAGE Button Code 1 1 Code 2 2 Code 3 3 Code 4 4 Code 5 5 Code 6 6 Code 7 7 Code 8 8 MENU button IMAGE button Wireless Mouse Operation The remote control unit can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function is used, the wireless mouse is not available. L-CLICK button Acts as left click while the projector and a computer are connected with a USB cable. PRESENTATION POINTER button Move the pointer on the screen with this button. R-CLICK button Acts as right click while the projector and a computer are connected with a USB cable. 14