Canon LV-7575 LV-7575 Basic Serial Command Functional Specifications - Page 24

LV-7575 Basic Serial Command Functional Specifications projector clears the information of Abnormal Temperature and normal operation starts. "24" [CR] Status: Power-Save Cooling Down in process This indicates Power Management in the Setting menu is enabled and Power-Save Cooling Down operation is in process. During this time, any Functional Execution Command is invalid. In this Power-Save Cooling Down function, the status moves to Power Save after the given Cooling down operation. Status No signal Response "00" Power-Save Cooling Down "24" Power Save "04" No signal status has passed for the time set by power management timer After about 90 sec. "04" [CR] Status: Power Save This indicates it moves to Power-Save status by Power Management function as set in the Setting menu. "21" [CR] Status: Cooling Down in process after OFF due to Lamp Failure When the projector is turned off due to lamp failure, it automatically starts Cooling Down operation. The projector returns "21" [CR]. "21" [CR] has been kept during Cooling Down operation. "81" [CR] Status: Standby after Cooling Down due to Lamp Failure The projector has recovered from Lamp Failure status. When the projector enters Standby status after Cooling Down operation invoked due to lamp failure, it returns "81". This indicates the status turns to Standby due to lamp failure. This status continues until the next operation is started; when Power On is executed, the projector clears the information of Lamp Failure and normal operation starts. 24/26