Canon LV-7575 LV-7575 Basic Serial Command Functional Specifications - Page 25

LV-7575 Basic Serial Command Functional Specifications 7.4 Input Mode Read Command Command "CR1" [CR] Detail Get currently selected Input No. Acceptable "%1" [CR] "1" = Input 1 is selected. Response %1 "2" = Input 2 is selected. "3" = Input 3 is selected. "4" = Input 4 is selected.(only for Networking-capable models) Unacceptable "?" [CR] 7.5 Lamp Time Read Command Command "CR3" [CR] Detail Get total lamp running hours. *return lamp operating time multiplied by the given coefficient (not actual used time) Acceptable "%1" [CR] Display Lamp running hours with 5 digit numbers. Response %1 Example: "00410" [CR 410 hours Unacceptable "?" [CR] 7.6 Setting Read Command Command "CR4" [CR] Detail Get screen setting status such as Ceiling/Rear. Acceptable "%1" [CR] "11" [CR] = Normal Screen Setting "10" [CR] = Picture is top/bottom reversed. (Status: Rear & Ceiling Response %1 ON) "01" [CR] = Picture is left/right reversed. (Status: Rear ON) "00" [CR] = Picture is top/bottom and left/right reversed. (Status: Ceiling ON) Unacceptable "?" [CR] 7.7 Temp Read Command Command "CR6" [CR] Detail Get the information of temperature inside a projector. With several built-in temperature sensors, it can get all the temperatures at once. Acceptable "%1 _ %2 _ %3" [CR] %1 = Temp. of sensor 1 %2 = Temp. of sensor 2 %3 = Temp. of sensor 3 Temperature data basic format is "_00.0". ("_" indicates a space) When the temperature goes under 0, it starts with "-" instead of a %1 space like "-05.5" [CR]. Response %2 When no temperature data returns due to hardware problems, it %3 starts with "E" like"E00.0" [CR]. With several built-in temperature sensors, the projector returns the values in succession. "_31.5_ _35.2_ 33.4 " [CR] The first sensor's data is followed by one space and afterwards the second sensor's data. Unacceptable "?" [CR] 25/26