Canon LV-8300 Projector Monitoring Software Ver.1.0.0 User's Manual - Page 14
Enter a projector group name, and place a check mark beside necessary, Click [OK] when you - clean filter
View all Canon LV-8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CHAPTER 2 • Routine Operation 22 Enter a projector group name, and place a check mark beside necessary projector parameter categories and enter its conditions for classification. It will be a "Status group" if more than one condition is specified, and a "User group" if none is specified. Category Projector group name Product name Projector name Location Status Warning Lamp Lamp Time (converted) Filter Air filter time Description Enter a name within 40 one-byte characters. Enter a product name of the projector. Enter any name of a projector in two-byte or one-byte characters. Enter a location of the projector in two-byte or one-byte characters Select a status of the projector from "Disconnected", "Power off", or "Power on". Select a warning status of the projector from "Yes" or "No". Select a status of the lamp from "Normal", "Obtain a new lamp", "Replace with the new lamp", "Obtain or replace with the new lamp", or "Warning". Select from "over" or "less than", and enter a number from 0 to 99999 for lamp usage time. Select a status of the filter from "Normal", "Cleaning the air filter", "Replacing the air filter" or "Cleaning or replacing the air filter". Select from "over" or "less than" and enter a number from 0 to 99999 for air filter usage time. 33 Click [OK] when you have completed entering the conditions. Projector group is now added in the Projector group list. 14