Canon LV-X7 LV User's Manual - Page 63
Menu Descriptions & Functions [Information] - bulb
View all Canon LV-X7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
5. Using On-Screen Menu ❼ Menu Descriptions & Functions [Information] Displays the status of the lamp / filter / projector usage and the current signal. This item has three pages. The information included is as follows: [Usage time] [Remaining lamp time] (%) [Filter counter] (H) [Lamp counter] (H) Remaining Lamp/Lamp Counter The projector has the Quiet mode. The lamp life varies depending on two modes: quiet mode and normal mode. The [Remaining lamp time] shows the percentage of remaining bulb life. The [Lamp counter] shows the amount of lamp usage (hours). • When the remaining lamp time reaches 0%, the "Replace with the new lamp." message will be displayed. Replace with the new lamp. See page 58 for lamp replacement. • The message for lamp replacement will be displayed under the following conditions: - one minute after the projector has been powered on. - when the POWER ON/STAND BY button on the projector cabinet or the POWER OFF button on the remote control is pressed. To cancel the message, press any button on the projector cabinet or the remote control. • When the remaining lamp time reaches 0%, the Remaining lamp time bar indicator changes from 0% to 100(H) in red and starts counting down. When the remaining lamp time reaches 0 hours, the projector will not turn on. Model LV-7365 LV-7265/LV-7260 LV-X7 Normal 2000 2000 3000 Lamp life(H) Quiet 3000 3000 4000 Replacement lamp LV-LP30 LV-LP26 LV-LP27 [Input signal] [Source index] [Vertical frequency] [Video type] [Sync polarity] [Horizontal frequency] [Input signal type] [Sync type] [Scan type] 54