Canon ME-20F SH User Manual

Canon ME-20F SH Manual

Get Canon ME-20F SH PDF manuals and user guides View all Canon ME-20F SH manuals
Add to My Manuals
Save this manual to your list of manuals

Canon ME-20F SH manual content summary:

  • Canon ME-20F SH | User Manual - Page 1
    PUB. DIM-1141-000 Multi-Purpose Camera Instruction Manual Caméra polyvalente Mode d'emploi English Français
  • Canon ME-20F SH | User Manual - Page 2
    AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: 2 Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. FCC NOTICE Multi-Purpose Camera, ME20F-SH Systems. This device complies
  • Canon ME-20F SH | User Manual - Page 3
    Important Safety Instructions In these safety instructions the word "apparatus" refers to the Canon Multi-Purpose Camera ME20F-SH and all its accessories. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 3 4. Follow all instructions. 5. Do not use this apparatus
  • Canon ME-20F SH | User Manual - Page 4
    of the above should get into the camera it may damage the camera and/or the lens. Consult a Canon Service Center as soon as possible. 4 • Be careful to avoid dust and dirt particles accumulating on the lens or entering the camera. When you finish using the camera, make sure to attach the body cap
  • Canon ME-20F SH | User Manual - Page 5
    Highlights of the ME20F-SH The Canon ME20F-SH Multi-Purpose Camera boasts numerous features that allow it to excel in a variety of situations. The following highlights some of the ways that this camera can meet your needs. HD Video High-sensitivity 35mm full-frame CMOS sensor and DIGIC DV 4 image
  • Canon ME-20F SH | User Manual - Page 6
    1. Introduction 7 Introduction 7 Supplied Accessories 7 Conventions Used in this Manual 7 Names of Parts 10 6 Example Configuration 15 2. Preparations 16 Preparing the Power Supply 16 Using the DC IN 1 Terminal 16 Using the DC IN 2 Terminal 17 Turning the Camera On and Off 17 Connecting to an
  • Canon ME-20F SH | User Manual - Page 7
    Introduction Introduction Thank you for purchasing the Canon ME20F-SH. Please read this manual carefully before you use the camera and retain it for future reference. 7 Supplied Accessories The following accessories are supplied with the camera. Body Cap* Power connector * Comes pre-attached
  • Canon ME-20F SH | User Manual - Page 8
    59). 8 Light Metering Mode Select the light metering mode to match the shooting conditions. Using the appropriate setting will produce a suitable exposure level during automatic exposure when the camera mode is set to [Auto] or when you are using push auto iris. 1 Open the [Light Metering] submenu
  • Canon ME-20F SH | User Manual - Page 9
    buildings or rooms are to be monitored. Canon shall have no liability whatsoever in this regard. 9 Legal Notice In some cases camera monitoring may be prohibited by law or regulation, the details of which differ by country or region. Before using the camera, check the laws and regulations of the
  • Canon ME-20F SH | User Manual - Page 10
    Names of Parts Names of Parts Back view 1 10 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 BAR (color bars) button (A 28)/ Assignable button 1 (A 48) 2 SET WB (custom white balance) button (A 41)/Assignable button 2 (A 48) 3 ABB (automatic black balance) button (A 22)/Assignable button 3 (A 48)
  • Canon ME-20F SH | User Manual - Page 11
    Front view 1 2 Names of Parts 11 3 4 5 1 LENS terminal Currently, not yet available for use. Lens operational control will be made available in a future firmware update. 2 Lens mount handle (A 22) 6 3 EF lens mount index (A 22) 4 EF-S lens mount index (A 22) 5
  • Canon ME-20F SH | User Manual - Page 12
    Names of Parts Top view 1 12 1 Socket for 0.64 cm (1/4 in.) screws 2 Socket for 0.95 cm (3/8 in.) screws (A 26) 2 3 7 3 TB-1 Tripod Base for tripods with 0.95 cm (3/8 in.) screws (A 26)
  • Canon ME-20F SH | User Manual - Page 13
    Bottom view 1 Names of Parts 13 2 1 Socket for 0.64 cm (1/4 in.) screws 2 Socket for 0.95 cm (3/8 in.) screws (A 26) 3 3 TB-1 Tripod Base for tripods with 0.95 cm (3/8 in.) screws (A 26)
  • Canon ME-20F SH | User Manual - Page 14
    Names of Parts Right side view 14 12 1 Air intake vent (A 62) Left side view 2 Focal plane mark 12 1 Focal plane mark 2 Exhaust ventilation outlet (A 62)
  • Canon ME-20F SH | User Manual - Page 15
    service center. Shipping and handling charges may apply. Contact a Canon Customer Support Center for details. • When connecting the optional RC-V100 Remote Controller to the camera, make sure that the remote controller's terminal selection switch is set to match the terminal to be used on the camera
  • Canon ME-20F SH | User Manual - Page 16
    Preparing the Power Supply You can power the camera using a commercially available external power supply connected to the available) Power cable rating: 5 A (maximum) / 30 V DC (rated) Using the DC IN 1 Terminal Refer to the following terminal configuration when selecting a power cable
  • Canon ME-20F SH | User Manual - Page 17
    with IEC/UL60950-1 (SEVL/LPS) standards. Turning the Camera On and Off Set the Q switch to ON to turn on the camera and set it to OFF to turn off the camera. • The Q indicator will illuminate in green while the camera is on. However, you can use the [Other Functions] > [Power LED] setting to turn
  • Canon ME-20F SH | User Manual - Page 18
    [Frame Rate] setting and [Audio/Video Setup] > [3G-SDI Mapping] settings are set correctly. • For external monitors that support only 480P or 576P input, connect the camera using a commercially available HDMI cable. • When the output signal is 480P or 576P, onscreen displays will not be superimposed
  • Canon ME-20F SH | User Manual - Page 19
    will need to set the date and time of the camera before you can start using it. When the camera's clock is not set, the [Date/Time] screen will (A 65) and set the time zone, date and time again. Similarly, if the camera's settings have been reset, you will need to perform the setup again. • The time
  • Canon ME-20F SH | User Manual - Page 20
    of the camera's functions can be adjusted from the menu that opens after pressing the MENU button. You can also assign frequently used functions an option from the menu. In the procedures throughout the rest of this manual, opening and closing the menu is assumed and not included in the procedure.
  • Canon ME-20F SH | User Manual - Page 21
    grayed out. • Pressing the MENU button at any time closes the menu (except for the [Other Functions] > [Camera Name] setting screen). • When an optional RC-V100 Remote Controller is connected to the camera, you can use the remote controller's up/down/left/right/SET buttons in the same way as the
  • Canon ME-20F SH | User Manual - Page 22
    Q switch to ON. 3 Press the ABB button. • Alternatively, you can use the [Camera Setup] > [ABB] setting. 4 Select [OK] and then press the joystick a clean environment free of dust. Refer also to the instruction manual of the lens used. IMPORTANT • When attaching/removing a lens, avoid direct sunlight
  • Canon ME-20F SH | User Manual - Page 23
    lens. Clean any dust or dirt from the body cap and dust caps before using them. 23 Attaching an EF Lens 1 Set the Q switch to OFF. the lens mount handle clockwise until it stops (2). 3 Remove the body cap from the camera and any dust caps from the lens (3). 4 Align the lens and mount making sure
  • Canon ME-20F SH | User Manual - Page 24
    will [Off] appear grayed out. Visit your local Canon Web site and check if there is correction data available for the lens you are using. If so, download the necessary update package and upgrade the camera's firmware following the instructions supplied therein. 3 Select [On] and then press the
  • Canon ME-20F SH | User Manual - Page 25
    There are many ways in which you can configure the camera by connecting external devices. You can connect an external monitor an External Recorder (A 55). - For an optional RC-V100 Remote Controller, refer to Using the Optional RC-V100 Remote Controller (A 47). - For an external microphone, refer to
  • Canon ME-20F SH | User Manual - Page 26
    on where you install the camera, you may want to use a commercially available tripod, pan/ tilt head, housing unit or other accessory. The camera is shipped with two TB-1 Tripod Bases for tripods and accessories with 0.95 cm (3/8 in.) screws. In addition, the camera body itself is equipped with
  • Canon ME-20F SH | User Manual - Page 27
    an external monitor and microphone to check that 27 video and audio are being output correctly. Should the camera fail to operate correctly, consult a Canon Service Center. External monitor External microphone External recorder RC-V100 Remote Controller (optional) 1 Set the Q switch to ON
  • Canon ME-20F SH | User Manual - Page 28
    Consult a Canon Service Center. Onscreen Displays Refer to this section for an explanation of the various screen displays that appear on the shooting screen when an external monitor is conencted to the camera's 3G/HD-SDI 1 / MONITOR terminal or HDMI OUT terminal. You can use
  • Canon ME-20F SH | User Manual - Page 29
    to CP6, EOS, WDR, C.Log Temp. (in red) Fan (in red) Lens (in red) AWB, WB-A, WB-B, Dylt, Tung 00000K, ±0 Auto, Manual F0.0 00.0dB Description Camera name. Autofocus operation (one-shot AF). Currently selected custom picture file. Temperature warning. Fan warning. Lens error warning. White balance
  • Canon ME-20F SH | User Manual - Page 30
    to hide all onscreen displays; press the button again to show all onscreen displays again. • For external monitors that support only 480P or 576P input, connect the camera using a commercially available HDMI cable. • When the output signal is 480P or 576P, onscreen displays will not be superimposed
  • Canon ME-20F SH | User Manual - Page 31
    Frame Rate 1 Open the [Frame Rate] submenu. [Other Functions] > [Frame Rate] 2 Select the desired option and then press the joystick. • When connecting the camera using a 3G-SDI connection, select [59.94P] or [50.00P]. [Other Functions] [Frame Rate] [59.94i] or [50.00i]* * Depending on the country
  • Canon ME-20F SH | User Manual - Page 32
    Functions with the Joystick Adjusting Main Camera Functions with the Joystick Using only the joystick, you can adjust the following main camera functions. Note that some of the functions cannot be adjusted manually when the camera mode is set to [Auto]. • Camera mode (A 33) • Shutter speed (A 38
  • Canon ME-20F SH | User Manual - Page 33
    white balance. Oppositely, when the camera mode is set to [Manual], you can adjust those settings manually. By default, the camera mode is set to [Auto]. As such, the camera mode will be set to [Auto] the first time you use the camera or after you reset all the camera's settings. 33 [Auto] mode
  • Canon ME-20F SH | User Manual - Page 34
    joystick. NOTES • When using an EF lens that can correct the aperture value according to the position of the zoom, you can use the [Camera Setup] > [Zoom-Iris instruction manual of the RC-V100 for details on changing that setting. Momentary Automatic Aperture - Push Auto Iris You can have the camera
  • Canon ME-20F SH | User Manual - Page 35
    the aperture changes during automatic exposure when the camera mode is set to [Auto] or when you are using push auto iris. • When an optional RC-V100 Remote Controller is connected to the camera, you cannot use push auto iris while using the remote controller's FOCUS dial. 35 Exposure Compensation
  • Canon ME-20F SH | User Manual - Page 36
    weight to the subject in the center. [Spotlight]: Use this option when shooting a scene in which only a certain part of the picture is lit, for example, when the subject is lit by a spotlight. 36 NOTES • When the camera mode is set to [Manual], changing the light metering mode will not affect the
  • Canon ME-20F SH | User Manual - Page 37
    camera from using gain values above the preset limit. 37 Manual Adjustment 1 Set the camera mode to [Manual] camera, you can adjust the gain value with the remote controller's ISO/GAIN Í/Î buttons. Auto Gain Control (AGC) Limit 1 Set the camera mode to [Auto]. 2 Open the [AGC Limit] submenu. [Camera
  • Canon ME-20F SH | User Manual - Page 38
    want to set slower shutter speeds for darker environments. 1 Set the camera mode to [Manual] (A 33). 2 Press the joystick. 38 • One of the adjustable available shutter speeds vary depending on the system frequency and frame rate used. System frequency / Frame rate 59.94 Hz 50.00 Hz 59.94P
  • Canon ME-20F SH | User Manual - Page 39
    the soft focus caused by diffraction when using small apertures. 1 Set the camera mode to [Manual] (A 33). • Alternatively, you can leave the camera mode set to [Auto] and change the [Camera Setup] > 39 [ND Mode] setting to [Manual] to be able to adjust manually only the ND filter. 2 Press the
  • Canon ME-20F SH | User Manual - Page 40
    on the screen are approximate. Use them only as a reference. Auto White Balance (AWB) The camera constantly adjusts the white balance automatically to achieve an optimal level. The camera will adjust the white balance if the light source changes. 1 Set the camera mode to [Manual] (A 33). 2 Press the
  • Canon ME-20F SH | User Manual - Page 41
    with the auto white balance. • The custom white balance will be reset after using either option in the [Other Functions] > [Reset] setting. Color Temperature/Preset White Balance 1 Set the camera mode to [Manual] (A 33). 2 Press the joystick. • One of the adjustable settings will be highlighted in
  • Canon ME-20F SH | User Manual - Page 42
    White Balance 5 Push the joystick right. • Alternatively, you can press the SET WB button. • Color temperature: On the screen, the default color temperature value (5,500 K) next to the white balance setting will be highlighted in orange. Preset white balance: On the screen, the adjustment value ±0
  • Canon ME-20F SH | User Manual - Page 43
    is set to AF. ** Not available when a manual focus lens is attached to the camera. Manual Focus Focus manually using the focus ring on the lens. 1 Set the Refer to the instruction manual of the RC-V100 for details on changing that setting. One-Shot AF With one-shot AF, the camera will be able to
  • Canon ME-20F SH | User Manual - Page 44
    the following subjects or in the following cases. In such case, focus 44 manually. - Reflective surfaces - Subjects with low contrast or without vertical lines - a "focus limit" range for the attached lens, which will cause the camera to try to autofocus (with one-shot AF) on subjects only within
  • Canon ME-20F SH | User Manual - Page 45
    set the near end of the range 3 Adjust the focus to the desired position for the near end of the range. [Camera Setup] 4 Open the [Near] focus limit submenu. [Camera Setup] > [Focus Limit] > [Near] [Focus Limit] • When a focus limit has not been set, [Limit Off] will appear on the [Focus Limit
  • Canon ME-20F SH | User Manual - Page 46
    Infrared Mode Infrared Mode Using the infrared mode, the camera becomes more sensitive to infrared light, allowing you to shoot in dark locations. During infrared mode, only some functions are available for adjustment. 1 Open the [Infrared] submenu. [Camera Setup] > [Infrared] 46 2 Select [On]
  • Canon ME-20F SH | User Manual - Page 47
    camera on and off and navigating the menu, you can control various shootingrelated functions, such as aperture, shutter speed, and custom picture settings, like knee and sharpness. For details on how to connect and use the remote controller, refer to its instruction manual. Visit your local Canon
  • Canon ME-20F SH | User Manual - Page 48
    needs and preferences. When an optional RC-V100 48 Remote Controller is connected to the camera, you can use a fourth assignable button. The names of the buttons printed on the camera also indicate the buttons' default settings. Changing the Assigned Function 1 Open the [Assignable Buttons] submenu
  • Canon ME-20F SH | User Manual - Page 49
    Assignable Buttons Using an Assignable Button After you assign a function to one of the buttons, press the external recorder to start or stop recording. 55 [Custom Picture] Opens the [Custom Picture] submenu. 50 [Camera Mode A/M] Switches the camera mode between [Auto] and [Manual] . 33
  • Canon ME-20F SH | User Manual - Page 50
    50 NOTES • Custom picture files are exclusively compatible for use only with ME20F-SH cameras. Selecting Custom Picture Files Select a custom picture file to one of the custom picture files saved in the camera ([CP1] to [CP6], [EOS Std.], [Wide DR], [Canon Log]). • When you close the menu, the
  • Canon ME-20F SH | User Manual - Page 51
    values (equivalent to not using custom picture settings at all) or one of the preset settings ([EOS Std.], [Wide DR] or [Canon Log]) if you [EOS Std.]: This gamma curve approximates the look of an EOS digital SLR camera when the picture style is set to [Standard] P. Produces higher contrast than
  • Canon ME-20F SH | User Manual - Page 52
    to 50. (Default: ±0) When [Gamma] is set to [Wide DR] or [Canon Log], this setting has no effect on the picture. Black Gamma Output Level Input [ overexposed. When [Gamma] is set to [EOS Std.], [Wide DR] or [Canon Log], this setting has no effect on the picture. [Activate]: Activates/deactivates
  • Canon ME-20F SH | User Manual - Page 53
    be adjusted from -50 to 50. (Default: ±0) NOTES • When an optional RC-V100 Remote Controller is connected to the camera, the following custom picture settings can be changed using the buttons and dials on the remote controller. - [Black] > [Master Pedestal], [Master Black Red], [Master Black Blue
  • Canon ME-20F SH | User Manual - Page 54
    Customizing Onscreen Displays Customizing Onscreen Displays Custom displays allow you to adjust the onscreen displays that appear. For details on which onscreen displays can be customized and the setting options, refer to Onscreen Displays (A 28) and [Custom Display] (A 63). 1 Open the [Custom
  • Canon ME-20F SH | User Manual - Page 55
    terminal or HDMI OUT terminal. Use the terminal on the camera that matches the one you wish to use on the external recorder. For details on compatible external recorders, consult the 55 retail dealer from whom you purchased the camera or contact a Canon Service Center. For details on connecting
  • Canon ME-20F SH | User Manual - Page 56
    When a recording command has been sent and [Rec] appears on the screen, the following settings are not available to be changed. - [Camera Setup] > [ABB] - [Audio/Video Setup] > [3G-SDI Mapping], [Rec Command] - [Other Functions] > [Reset], [Time Zone], [Set Clock] > [Date/Time], [Assignable Buttons
  • Canon ME-20F SH | User Manual - Page 57
    Synchronizing with an External Device Synchronizing with an External Device Using genlock synchronization, you can synchronize this camera's video signal to that of an external video device. When a reference sync signal (analog blackburst or tri-level HD signal) is input through the GENLOCK
  • Canon ME-20F SH | User Manual - Page 58
    press the joystick. [MIC Power] [Off] IMPORTANT • Supplying power to a microphone without plug-in power functionally may damage the microphone. Audio Output The camera features 2-channel linear PCM audio output. The sampling frequency is 48 kHz and the audio bit depth is 16 bit. The audio from
  • Canon ME-20F SH | User Manual - Page 59
    iris, in order to darken or lighten the image (A 35). [High], [Normal], [Low] Determines how quickly the aperture changes when the camera mode is set to [Auto] or when you are using push auto iris. [Off (75dB)] to [36dB] (in 3-dB increments) You can set an automatic gain control (AGC) limit to
  • Canon ME-20F SH | User Manual - Page 60
    [On], [Off] When this setting is set to [On], reduces the peripheral illumination fall-off or vignetting that may occur when using an EF-S lens with this camera. However, the image is digitally enlarged by a factor of approx. 1.48 so the image will deteriorate. [Cancel], [OK] Starts the procedure
  • Canon ME-20F SH | User Manual - Page 61
    camera. [Manual]: The ND filter level is adjusted manually (A 39). [On], [Off] 61 When this setting is set to [On] and the camera to [CP6], [EOS Std.], [Wide DR], [Canon Log] Selects a custom picture file to apply its setting is set to [On], you can use an assignable button set to [External Rec]
  • Canon ME-20F SH | User Manual - Page 62
    's clock (A 19). [Date Format] [YMD], [YMD/24H], [MDY], [MDY/24H], [DMY], [DMY/24H] Sets the date format and time format for the camera's clock. The default value depends on the country/region of purchase. [Assignable Buttons] [1] to [4 (Remote)] [(NONE)], [One-Shot AF], [Push Auto Iris], [ABB
  • Canon ME-20F SH | User Manual - Page 63
    ] ([000]) When using genlock synchronization, the phase difference between the external genlock signal and the camera is initially set to ] Displays the white balance setting on the screen. [Camera Mode] [On], [Off] Displays the camera mode ([Auto] or [Manual]) on the screen. [Iris] [On], [Off]
  • Canon ME-20F SH | User Manual - Page 64
    Media] 64 [Firmware] Submenu / Setting options [Cancel], [OK] The camera has two "hour meters" - the first keeps track of total operation time setting. (For maintenance only.) Initializes the memory card used when updating the firmware. This menu option is usually unavailable. - You can
  • Canon ME-20F SH | User Manual - Page 65
    . If that does not solve the problem, consult a Canon Service Center. Built-in Rechargeable Lithium Battery The camera has a built-in rechargeable lithium battery to keep the date/time and other settings. The built-in lithium battery is recharged while you use the camera; however, it will discharge
  • Canon ME-20F SH | User Manual - Page 66
    droplets) to form on its internal surfaces. Stop using the camera if condensation is detected. Continued use may damage the camera. Condensation may form in the following cases: • When the camera is moved quickly from cold to warm places • When the camera is left in a humid room • When a cold room
  • Canon ME-20F SH | User Manual - Page 67
    USA: Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camera by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent
  • Canon ME-20F SH | User Manual - Page 68
    1/64 the amount of light) Infrared-cut filter: Motor operated • Focus: Manual focus, one-shot AF • Lens Correction Peripheral illumination correction is available for Canon EF lenses4 4 Some Canon EF lenses are not compatible with in-camera correction. • Gamma: Normal (four types), EOS Std., Wide DR
  • Canon ME-20F SH | User Manual - Page 69
    monitor that supports only 480P/576P is connected to the camera. • (Currently, not yet available for use. Lens operational control will be of 11 to 17 V DC • Power Consumption (camera body only): Approx. 12 W • Operating Temperature x 4.6 x 4.4 in.) • Weight (camera body only): 1,100 g (2.4 lb.)
  • Canon ME-20F SH | User Manual - Page 70
    Appendix Appendix Physical Measurements Back view 36.5 mm (1.4 in.) 70 29 mm (1.1 in.) Front view 28.5 mm (1.1 in.) 102 mm (4.0 in.) 38.8 mm (1.5 in.) 20 mm (0.79 in.) 40.5 mm (1.6 in.) 19.5 mm (0.77 in.) 1 mm (0.04 in.) 116 mm (4.6 in.) Top view 52.8 mm (2.1 in.) 112.3 mm (4.4 in.) ∅5.4 mm
  • Canon ME-20F SH | User Manual - Page 71
    Appendix Bottom view Right side view ∅5.4 mm (5.6 mm deep) (0.22 in. deep) 27.9 mm (1.1 in.) 65 mm (2.6 in.) 9 mm deep* (0.35 in. deep) 10 mm deep** (0.39 in. deep) 4.7 mm 71 (8.5 mm deep) (0.33 in.deep) 7 mm deep* (0.28 in. deep) 14 mm (0.55 in.) 7.5 mm (0.30 in.) 51.5 mm (2.0 in.) 38.5
  • Canon ME-20F SH | User Manual - Page 72
    iris 34 Assignable buttons 48 Audio input and output 58 Audio reference signal 28 AWB (auto white balance 40 B Black balance 22 C Camera mode 33 Canon Log 50 Color bars 28 Condensation 66 Connecting to an external monitor 18 Connecting to an external recorder 55 Controlling an external
  • Canon ME-20F SH | User Manual - Page 73
    Turning the camera on/off 17 U Using the optional RC-V100 Remote Controller 47 V Video configuration 31 73 W White balance 40 Wide DR 51
  • Canon ME-20F SH | User Manual - Page 74
    USA & CANON MULTI-PURPOSE CAMERA EQUIPMENT LIMITED WARRANTY FOR PRODUCTS PURCHASED IN THE UNITED STATES The Limited Warranty set forth below is given by Canon U.S.A., Inc. ('Canon USA') with respect to the Canon multipurpose camera (the "Product") when purchased and used in the United States. This
  • Canon ME-20F SH | User Manual - Page 75
    OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY CANON USA AND CAUSING
  • Canon ME-20F SH | User Manual - Page 76
    by Canon Canada Inc. ('Canon Canada') with respect to the Canon multi-purpose camera (the "Product") when purchased and used in instructions prescribed in Canon user's manual; (b) Defects or damage caused by sand, dirt or water, or by service other than Canon Canada's Factory Service Centres; (c) Use
  • Canon ME-20F SH | User Manual - Page 77
    OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY CANON CANADA AND
  • Canon ME-20F SH | User Manual - Page 78
    Hl 96814 USA ❖If you have any questions, call the Canon U.S.A. Information Center toll-free at 1-800-828-4040 (USA only). Visit your local Canon Web site to download the latest version of this Instruction Manual. Consultez le site Web Canon de votre pays pour télécharger la version la plus récente
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
PUB. DIM-1141-000
Multi-Purpose Camera
Instruction Manual
Caméra polyvalente
Mode d’emploi
English
Français