Canon ME-20F SH User Manual - Page 55

5 External Connections Connecting to an External Recorder Connecting to an External Recorder Connect the camera to an external recorder using the 3G/HD-SDI 1 / MONITOR terminal, 3G/HD-SDI 2 terminal or HDMI OUT terminal. Use the terminal on the camera that matches the one you wish to use on the external recorder. For details on compatible external recorders, consult the 55 retail dealer from whom you purchased the camera or contact a Canon Service Center. For details on connecting the camera to an external monitor, refer to Connecting to an External Monitor (A 18). 3G/HD-SDI input BNC cable (commercially available) BNC cable (commercially available) External recorder HDMI input HDMI cable (commercially available) Outputting a Recording Command to an External Recorder You can use an assignable button set to [External Rec] or an optional RC-V100 Remote Controller to output a recording command to an external recorder connected to the camera to start or stop recording. 1 Set an assignable button to [External Rec]. [Other Functions] > [Assignable Buttons] > Desired button ([1] to [4 (Remote)]) > [External Rec] 2 Press the assignable button to output a recording command to start recording. • Alternatively, when an optional RC-V100 Remote Controller is connected to the camera, you can press the remote controller's START/STOP button. • While a recording command is being output, [Rec] will appear on the right of the screen. 3 Press the assignable button again to output a recording command to stop recording. • [Rec] will disappear. NOTES • If the recording command does not seem to be output when you press the assignable button, make sure that the [Audio/Video Setup] > [Rec Command] setting is set to [On].