Canon ME-20F SH User Manual - Page 18

Connecting to an External Monitor, Connection Diagram

Get Canon ME-20F SH PDF manuals and user guides View all Canon ME-20F SH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Connecting to an External Monitor Connecting to an External Monitor Connect the camera to an external monitor using the 3G/HD-SDI 1 / MONITOR terminal, 3G/HD-SDI 2 terminal or HDMI OUT terminal. Use the terminal on the camera that matches the one you wish to use on the monitor. Video and audio will be output as a digital signal from the aforementioned terminals. 18 Connection Diagram Refer to the following connection diagram. When connecting the camera using the 3G/HD-SDI 1 / MONITOR terminal or 3G/HD-SDI 2 terminal, use a commercially available BNC cable; when using the HDMI OUT terminal, use a commercially available HDMI cable. 3G/HD-SDI input External monitor BNC cable (commercially available) BNC cable (commercially available) HDMI input HDMI cable (commercially available) NOTES • If video output from the camera does not appear on the screen when using a 3G-SDI connection, perform the following. - Check that the external monitor is compatible with the 3G-SDI standard. - Check that the [Other Functions] > [Frame Rate] setting and [Audio/Video Setup] > [3G-SDI Mapping] settings are set correctly. • For external monitors that support only 480P or 576P input, connect the camera using a commercially available HDMI cable. • When the output signal is 480P or 576P, onscreen displays will not be superimposed on the video signal. • Onscreen displays will not be superimposed on the video signal output from the 3G/HD-SDI 2 terminal. To output onscreen displays, use the 3G/SHD-SDI 1 / MONITOR terminal or HDMI OUT terminal.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Connecting to an External Monitor
18
Connecting to an External Monitor
Connect the camera to an external monitor using the 3G/HD-SDI 1 / MONITOR terminal,
3G/HD-SDI 2 terminal or HDMI OUT terminal. Use the terminal on the camera that matches the one
you wish to use on the monitor.
Video and audio will be output as a digital signal from the aforementioned terminals.
Connection Diagram
Refer to the following connection diagram. When connecting the camera using the 3G/HD-SDI 1 /
MONITOR terminal or 3G/HD-SDI 2 terminal, use a commercially available BNC cable; when using the
HDMI OUT terminal, use a commercially available HDMI cable.
NOTES
•
If video output from the camera does not appear on the screen when using a 3G-SDI connection,
perform the following.
-
Check that the external monitor is compatible with the 3G-SDI standard.
-
Check that the [Other Functions]
>
[Frame Rate] setting and [Audio/Video Setup]
>
[3G-SDI
Mapping] settings are set correctly.
•
For external monitors that support only 480P or 576P input, connect the camera using a
commercially available HDMI cable.
•
When the output signal is 480P or 576P, onscreen displays will not be superimposed on the video
signal.
•
Onscreen displays will not be superimposed on the video signal output from the 3G/HD-SDI 2
terminal. To output onscreen displays, use the 3G/SHD-SDI 1 / MONITOR terminal or HDMI OUT
terminal.
BNC cable (commercially available)
HDMI cable (commercially available)
3G/HD-SDI input
HDMI
input
External monitor
BNC cable (commercially available)