Canon PIXMA MG5120 MG5120 series Getting Started - Page 4

3 4 5 Use the { or } button (E) on 6 When this screen appears, press the OK the Operation button, then go to the Panel to select next step. D C B the language for the LCD, then press the OK button. • If an unintended language is displayed on the LCD, press the Back button (F) to return to the Language selection E screen. Insert the power cord into the connector on the left side at the back of the machine and into the wall outlet firmly. • Do NOT connect the USB cable at this stage. • Make sure that the Document Cover (B) is closed. Press the ON button (C), then adjust the LCD (Liquid Crystal Display) (D) to a comfortable viewing angle. • The machine may make some operating noises. This is normal operation. • It takes about 4 seconds for the ON button to work after the power cord is plugged in. When it is necessary to turn off the machine Be sure to follow the procedure below. 1. Press the ON button to turn off the machine. 2. Make sure that the POWER lamp (G) is not lit. Operating noise may continue for up to 35 seconds until the machine turns off. 1 2 G  1 Preparation F • When removing the power plug, make sure that the POWER lamp is not lit before removing the plug. Removing the power plug while the POWER lamp lights up or flashes may cause drying and clogging of the Print Head, resulting in poor printing. • The specification of the power cord differs for each country or region.