Canon PIXMA MG5120 MG5120 series Getting Started - Page 6
E pointing up while being careful not to block, Hold the ink tank with the orange protective cap
View all Canon PIXMA MG5120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 4 5 E F G H 1. Remove the orange tape completely. 2. Remove the protective film completely. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to block the L-shape air hole (F). • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied ink tanks. • If the orange tape remains on the L-shape air hole, ink may splash or the machine may not print properly. • If you push the sides of the ink tank with the L-shape air hole blocked, ink may splash. Hold the ink tank by its sides and slowly twist the orange protective cap 90 degrees horizontally to remove it off. Do not push the sides of the ink tank. • Do not touch the inside (G) of the orange protective cap or the open ink port (H). The ink may stain your hands if you touch them. 2 Install the Ink Tanks