Canon PIXMA MG7520 User Manual - Page 290

Setting Up the Card Slot as the Memory Card Drive of the Computer The card slot of the machine can also be used as the memory card drive of the computer. Note • When you use the machine over LAN, the card slot of the machine can be used as the network drive. Using the Card Slot over a Network Important • When Read/write attribute in Device user settings under Device settings is set to Writable from USB PC or Writable from LAN PC using the operation panel of the machine, you cannot print photos on a memory card using the operation panel of the machine. After using the card slot as the memory card drive of the computer, remove the memory card, then be sure to set Read/write attribute to Not writable from PC. When you turned off the machine, Writable from USB PC or Writable from LAN PC will be canceled and the setting is returned to Not writable from PC when you turn on the machine next time. 1. Make sure that the machine is turned on. 2. Make sure that the memory card is not set. If the memory card is set, remove it from the card slot. Inserting the Memory Card 3. Flick the HOME screen, then tap Using the Operation Panel Setup. 4. Tap Device settings. 5. Tap Device user settings. 6. Tap Read/write attribute. 7. Check the message that is displayed, then tap OK. 8. Tap a read/write attribute to specify the setting. Writable from USB PC The card slot is used as the memory card drive of a computer connected to the machine via USB. Data can be written on the memory card from the computer. Writable from LAN PC The card slot is used as the memory card drive of a computer connected to the machine via a network. Data can be written on the memory card from the computer. 290