Canon PIXMA MG7520 User Manual - Page 556
How to set, Adjust disc print area, Print settings, Device settings
View all Canon PIXMA MG7520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 556 highlights
Note • You can see the procedure to set the printable disc by tapping How to set. The next screen is displayed by tapping Next. Additionally, touching the Stop button returns to the print confirmation screen. • For details on how to set the printable disc: Placing a Printable Disc 9. Tap OK. The machine starts copying. Note • Touch the Stop button to cancel copying. • After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried. • To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten discs when printing more than ten discs continuously. To stop the printing operation, detach the disc tray from the machine, then close the disc tray guide. After approximately three minutes have elapsed, open the disc tray guide, attach the disc tray to the machine, then resume printing. • If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings under Device settings. Print settings 556