Canon PIXMA MG7520 User Manual - Page 567

data (1-up). (May not be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.) *3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand PictBridge (Wireless LAN) compliant device. (May not be available with some Canon-brand PictBridge (Wireless LAN) compliant devices.) Print date & Default (Off: No printing), Date, File No., Both, Off file no. Image optimize Default (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye*2 *1 The scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print. *2 Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (May not be selected depending on the device.) Trimming Default (Off: No trimming), On (follow the camera's setting), Off Settings on the Machine You can change the PictBridge (Wireless LAN) print settings from the PictBridge print settings screen. Set the print settings to Default on the PictBridge (Wireless LAN) compliant device when you want to print according to the settings on the machine. This section describes the procedure to display the PictBridge print settings screen. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Using the Operation Panel Setup. 3. Tap Device settings. 4. Tap PictBridge print settings. 5. Check the message that is displayed, then tap OK. 6. Tap Photo print setting. The PictBridge print settings screen is displayed. For details on the setting items: PictBridge print settings Note • If you select Disc label print setting, the Set disc print area screen is displayed to change the disc label print setting. 567