Canon PIXMA MP495 Network Setup Troubleshooting - Page 2

ENGLISH Network Setup Troubleshooting This manual mainly describes problems you may encounter when setting up a network, and the possible causes and solutions. Find a description related to your problem and follow the solution. If you cannot find a description for your problem or if you encounter a problem after setup, refer to the onscreen manual: Basic Guide/Advanced Guide. Screens are based on Windows 7 Home Premium. Other Troubleshooting Tips Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security Protocol (encryption standard), and Network Key The Machine is Not Detected after the Network Environment is Changed • Names of functions, etc. may differ from this manual depending on your access point or application software. Problems during Software Installation P.2 The Target Access Point is Not Displayed (Detected) on the Detected Access Points P.2 List Screen An access point could not be detected. is Displayed P.2 Check Access Point to Be Used Screen is Displayed P.3 Check Settings Screen is Displayed P.3 Set Printer IP Address Screen is Displayed P.4 The Machine is Not Displayed (Detected) on the Detected Printers List Screen P.5 WPS WCN Additional Computers Setup Set Up New Printer Screen is Displayed P.6 Reference Information Configuring Wireless LAN Settings Manually Restoring the Machine's Default LAN Settings to Perform Setup Again Connection Checklist The following symbols are used in this manual. Instructions as notes for operation or additional explanations. Description for Windows users. Description for Macintosh users. Problems during Network Setup P.7 WPS "E > 2 > 0" is Displayed P.7 "E > 2 > 3" is Displayed P.7 "E > 2 > 4" is Displayed P.7 P.8 P.8 P.8 P.8 P.8 P.10 P.11