Canon PIXMA MX320 On-Screen Manual - Page 114

Replacing a FINE Cartridge Page 114 of 817 pages (E) Closed correctly (F) Not closed correctly (the cover is tilted) Note If the Ink Cartridge Locking Cover is not closed correctly, push down the Ink Cartridge Locking Cover until it clicks. Important The machine cannot print unless both the Color and Black FINE Cartridges are installed. Be sure to install both the FINE Cartridges. 6. Lift the Scanning Unit (Cover) slightly to set the Scanning Unit Support back to its original position, and gently close the Scanning Unit (Cover). Caution When setting the Scanning Unit Support back to its original position, be sure to hold the Scanning Unit (Cover) firmly, and be careful not to get your fingers caught. Important Do not hold the LCD or the Operation Panel. Note If the error message appears on the LCD after the Scanning Unit (Cover) is closed, refer to the "Troubleshooting " in the on-screen manual: Advanced Guide. When you start printing after replacing the FINE Cartridge, the machine starts cleaning the Print Head automatically. Do not perform any other operations until the machine completes the cleaning of the Print Head. While cleaning is in progress, the ON button is flashing green. If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head position. See Aligning the Print Head. Page top