Canon PIXMA MX320 On-Screen Manual - Page 672

Bluetooth Settings Screen Page 672 of 817 pages When you select MX860 series-2, the printer name displayed on the Bluetooth device is Canon MX860 series-2. The initial value is set to MX860 series-1. Graphic LCD Text LCD Access refusal Screen When you search from a Bluetooth device, you can enable or disable the display of the printer name. ON Disables searching from a Bluetooth device. OFF (Default setting) Enables searching and printing from a Bluetooth device. Security/Security settings Screen Enable Selecting Enable allows you to choose either of the security modes below. Mode 3(recommended) This mode is activated on link level enforced security. The passkey will be required when a Bluetooth device communicates with the printer. Normally select this mode. Mode 2 This mode is activated on service level enforced security. The passkey will be required when printing through the Bluetooth communication. After setting the security mode, we recommend making a trial print through Bluetooth communication. If printing does not start, change the security mode and try again. Setting a passkey will prevent unwanted access from other Bluetooth devices. You can change the passkey on the Passkey screen. Disable (Default setting) When you register the printer, you are not required to input a passkey. Passkey Screen When you select Enable on the Security or Security settings screen, you are required to set a passkey to register the printer on other Bluetooth devices. After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you were able to print from before the passkey was changed. In this case, input the new passkey. Graphic LCD