Canon PIXMA MX340 MX340 series Network Setup Troubleshooting - Page 13

Qt5-2809-v01, ©canon Inc.2010

Add to My Manuals
Save this manual to your list of manuals

QT5-2809-V01 XXXXXXXX ©CANON INC.2010 PRINTED IN VIETNAM

Section	Page
Problems during Software Installation	3
The Target Access Point is Not Displayed (Detected) on the Detected Access Points List Screen	3
An access point could not be detected. is Displayed	4
Check Access Point to Be Used Screen is Displayed	4
Check Settings Screen is Displayed	4
Set Printer IP Address Screen is Displayed	5
The Machine is Not Displayed (Detected) on the Detected Printers List Screen	5
WPS / WCN / Additional Computers Setup	6
Set Up New Printer Screen is Displayed	6
Problems during Network Setup	7
WPS	7
Multiple APs detected is Displayed	7
Cannot connect is Displayed	7
PIN codes do not match is Displayed	8
Other Troubleshooting Tips	8
Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security Protocol (encryption standard), and Network Key	8
The Machine is Not Detected after the Network Environment is Changed	8
Reference Information	9
Configuring the Access Point's Wireless LAN Settings Manually	9
Restoring the Machine's Default LAN Settings to Perform Setup Again	10

Match case Limit results 1 per page

QT5-2809-V01

XXXXXXXX

PRINTED IN VIETNAM