Canon PIXMA MX340 MX340 series Network Setup Troubleshooting - Page 2

Network Setup Troubleshooting This manual mainly describes problems you may encounter when setting up a network, and the possible Other Troubleshooting Tips P.6 causes and solutions. Find a description related to your problem and follow the solution. If you cannot find a description for your problem or if you encounter a problem after setup, refer to the on- Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security P.6 screen manual: Basic Guide/Advanced Guide. Protocol (encryption standard), and Network Key Screens are based on Windows Vista Ultimate. The Machine is Not Detected after the Network Environment is Changed P.6 • Names of functions, etc. may differ from this manual depending on your access point or application Reference Information P.7 software. Configuring the Access Point's Wireless LAN Settings Manually P.7 Problems during Software Installation Restoring the Machine's Default LAN Settings to Perform Setup Again P.8 P.1 The Target Access Point is Not Displayed (Detected) on the Detected Access Points P.1 Connection Checklist P.9 List Screen An access point could not be detected. is Displayed Check Access Point to Be Used Screen is Displayed P.2 P.2 The following symbols are used in this manual. Check Settings Screen is Displayed P.2 Set Printer IP Address Screen is Displayed P.3 The Machine is Not Displayed (Detected) on the Detected Printers List Screen P.3 Instructions as notes for operation or additional explanations. Description for Windows users. WPS WCN Additional Computers Setup Description for Macintosh users. Set Up New Printer Screen is Displayed P.4 Problems during Network Setup P.5 WPS Multiple APs detected is Displayed P.5 Cannot connect is Displayed P.5 PIN codes do not match is Displayed P.6