Canon PIXMA TR8520 TR8500 series User Manual - Page 416
Make sure original is loaded correctly on platen glass or in ADF.
View all Canon PIXMA TR8520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 416 highlights
Perform print head deep cleaning. If the problem is not resolved after performing print head deep cleaning, turn off the printer and perform print head deep cleaning again 24 hours later. • If problem is not resolved after performing print head deep cleaning twice: If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair. Check5 When using paper with one printable surface, check the correct printable side of the paper. Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality. When you load paper on the rear tray, load paper with the printable side facing up. When you load paper in the cassette, load paper with the printable side facing down. Refer to the instruction manual supplied with the paper for detailed information on the printable side. • When copying, see also the sections below: Check6 Is platen glass or glass of ADF dirty? Clean the platen glass or the glass of ADF. Cleaning the Platen Glass and Document Cover Cleaning the ADF (Auto Document Feeder) Note • If the glass of ADF is dirty, black streaks appear on the paper as shown below. Check7 Make sure original is loaded correctly on platen glass or in ADF. Loading Originals Check8 Is original document is loaded with proper side facing up/down? When loading the original on the platen glass, the side to be copied should be face down. When loading the original in the ADF, the side to be copied should be face up. Check9 Did you copy a printout done by this printer? If you use a printout done by this printer as the original, print quality may be reduced depending on the condition of the original. Print from the printer directly, or reprint from the computer if you can reprint from it. 416