Canon PIXMA TS6320 TS6300 series Getting Started Guide - Page 4
Installing the Ink Tanks, mark appears on the screen.
View all Canon PIXMA TS6320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Setting Up the Printer 4. Installing the Ink Tanks 1 Open the scanning unit / cover. Caution Do not touch the print head holder until it stops moving. 2 Remove the tape and film on the ink tank. b a • Check that no tape is left over. 3 Slowly remove the orange cap. • Important Do not squeeze the ink tank with the Y-shaped air hole blocked. • Do not touch the areas shown in red. 5 Check that the mark appears on the screen. Important If the mark is not displayed on the screen even though you have installed the ink tank, the color of the ink tank may be wrong or you may have installed an ink tank, such as one with a different model number, that is not supported by this printer. Either install an ink tank for the correct color or use the provided ink tank for setup. 6 Repeat steps 2 through 5 to install all the ink tanks. • Check that a mark is displayed on the screen for each color. 7 Close the scanning unit / cover. • The printer will start initializing. a b Caution Watch your fingers. 4 Install the ink tank. • Insert the ink tank into the print head and press down until it clicks. 2