Canon PIXMA TS9120 TS9100 series User Manual - Page 368

Note • See Unplugging the Printer to unplug the printer correctly. • Cannot connect to the server. Please wait a while and try again. The printer cannot connect to the server due to a communication error. Select OK on the touch screen and try again after a while. Error Regarding Automatic Duplex Printing Is Displayed Check See Automatic Duplex Printing Problems and take the appropriate action. Error Regarding Power Cord Being Unplugged Is Displayed (Windows) The printer may have been unplugged while it was on. Check the error message that appears on the computer and click OK. The printer starts printing. See Unplugging the Printer for unplugging the power cord. Writing Error/Output Error/Communication Error (Windows) Check1 If the ON lamp is off, make sure printer is plugged in and turn it on. The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Check2 Make sure printer is properly connected to computer. If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When the USB cable is securely plugged in, check the following: • If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact the vendor of the relay device. • There could also be a problem with the USB cable. Replace the USB cable and retry the printing. If you use the printer over a LAN, make sure the printer is correctly set up for network use. 368