Canon PIXMA TS9120 TS9100 series User Manual - Page 93
Loading Two or More Originals on the platen glass
View all Canon PIXMA TS9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Loading Two or More Originals on the platen glass Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.40 inches (1 cm) or more space between the edges (diagonally striped area) of the platen glass and the originals, and between the originals. Portions placed on the diagonally striped area cannot be scanned. You can place up to 12 items. A: More than 0.40 inches (1 cm) Note • The Skew Correction function automatically compensates for the originals placed at an angle of up to approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot be corrected. • Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly. 93
Loading Two or More Originals on the platen glass
Place the originals WITH THE SIDE TO SCAN FACING DOWN. Allow 0.40 inches (1 cm) or more space
between the edges (diagonally striped area) of the platen glass and the originals, and between the
originals. Portions placed on the diagonally striped area cannot be scanned.
You can place up to 12 items.
A: More than 0.40 inches (1 cm)
Note
•
The Skew Correction function automatically compensates for the originals placed at an angle of up to
approximately 10 degrees. Slanted photos with a long edge of 7.1 inches (180 mm) or more cannot
be corrected.
•
Non-rectangular or irregular shaped photos (such as cut out photos) may not be scanned properly.
93